Overview
- A horizontal type force tester.
- Suitable for testing small workpieces since workpieces can be set easily.
- Options available for die shear test of boards, electronic devices, etc.
Examples of use
- Die shear test
- Connector strength test
Specifications
| MODEL-2152VCE | |
| Max. force | 500N（50kgf） |
| Force accuracy | Depends on the load cell used. |
| Force measuring amplifier | MODEL-1016C |
| Controller | Built in |
| Test speed | 10～80mm/min |
| Speed changing | 5 steps or stepless |
| Stroke | 150mm |
| Distance between test center and column | 77.5～117.5mm |
| Table size | W100×D100mm |
| Drive motor | DC brushless motor |
| Detector | Rotary encoder, resolution 0.01 mm |
| Display accuracy | 0.1mm |
| Dimensions | W518×H314×D345mm |
| Stand mass | Approx. 23 kg |
| Amplifier mass | Approx. 5.2kg |
| Power supply | Single phase, 100 VAC – 240 VAC, 0.5A |
| Standard set | Tester, force measuring amplifier MODEL-1016C, load cell 1 piece |
| Options | Additional load cell, jig/fixture, software |
