Enhanced system performance extends test capabilitiesVibration tests have become diversified and specifications have become increasingly strict.
i-series offer a user-friendly lineup with enhanced performance and durability.

Features

■ Expanded test range: maximum values that the i-series can offer: ・Maximum acceleration: 1250m/s²　・Maximum velocity: 2.2m/s　・Maximum displacement: 51mmp-p
・Maximum loading mass: 1,000kg
■ Patented upper (armature) support system PS Guide: Parallel Slope Guide is standard
■ Low noise: Optimised design of the air intake based on fluid dynamics has reduced the air-intake noise.
■ One of the world’s largest class air-cooled systems: Optimised magnetic circuits based on finite element analysis, and unique cooling technologies have enabled an excitation force of 65kN with air cooling.
■ All models can be directly coupled to a climatic chamber.

Table Insert Pattern

Unit: mm

Standard

System Model				Unit	i210/SA1HAG	i220/SA1HAG
System Specifications	Frequency Range			Hz	0-4000	0-3300
	Rated Force	Sine		kN	3	8
		Random		kN rms	3	8
		Shock		kN	9	16
	Maximum Acc.	Sine		m/s²	1000	1250
		Random		m/s² rms	700	875
		Shock		m/s² peak	2000	2000
	Maximum Vel.	Sine		m/s	2.2	2.2
	Maximum Vel.	Shock		m/s peak	2.2	2.2
	Maximum Disp.	Sine		mmp-p	30	51
	Maximum Travel			mmp-p	40	60
	Maximum Load			kg	120	200
	Power Requirements			kVA	6.8	16.4
	Breaker Capacity			A	30	60
Vibration Generator	Model				i210	i220
	Armature Mass			kg	3	6.4
	Armature Diameter			φmm	128	190
	Allowable Eccentric Moment			N・m	160	294
	Dimensions		Width	mm	868	1020
			Height	mm	700	903
			Depth	mm	458	550
	Shaker Body Diameter			φmm	458	550
	Mass			kg	350	900
Power Amplifier	Model				SA1HAG-i10	SA1HAG-i20
	Maximum Output			kVA	5	10
	Dimensions		Width	mm	580	580
			Height	mm	1750	1750
			Depth	mm	850	850
	Mass			kg	240	280
Controller	Vibration Controller				See Vibration Controller K2
Cooling	Cooling Method				Air cooling
	Blower	Dimensions	Width	mm	386	492
			Height	mm	882	1128
			Depth	mm	369	625
		Mass		kg	22	70
		Wattage		kw	0.4	1.5
		Duct Hose Diameter		φ	125	125

*Random force ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements.

*Power supply: 3-phase 200/220/380/400/415 V (A74 is only AC380/400/415 V), 50/60 Hz. A transformer is required for other supply voltages.

*Breaker capacity for AC 200 V.

*Specification above applies to 60 Hz. Dimensions change for 50 Hz.

*The specification shows the maximum system performance. For long-duration tests, system must be de-rated up to 70%.Continuous use at maximum levels may cause failure. Please contact IMV if your system operates at more than 70%.

*For random vibration tests, please set the test definition of the peak value of acceleration waveform to operate at less than the maximum acceleration of shock.

*Frequency range values vary according to the sensor andvibration controller.

*Armature mass and acceleration may change when a chamber is added.

*Mass and dimensions may change for CE-marked systems.

ECO

System Model				Unit	i220/EM1HAG
System Speciafications	Frequency Range			Hz	0-3300
	Rated Force	Sine		kN	8
		Random		kN rms	8
		Shock		kN	16
		High Velocity Shock		kN	10
	Maximum Acc.	Sine		m/s²	1250
		Random		m/s² rms	875
		Shock		m/s² peak	2000
		High Velocity Shock		m/s² peak	1562
	Maximum Vel.	Sine		m/s	2.2
		Shock		m/s peak	2.2
		High Velocity Shock		m/s peak	3.5
	Maximum Dsp.	Sine		mmp-p	51
		High Velocity Shock		mmp-p	51
	Maximum Travel			mmp-p	60
	Maximum Load			kg	200
	Power Requirements			kVA	16.4
	Breaker Capacity			A	60
Vibration Generator	Model				i220
	Armature Mass			kg	6.4
	Armature Diameter			φmm	190
	Allowable Eccentric Moment			N・m	294
	Dimensions		Width	mm	1020
			Height	mm	903
			Depth	mm	550
	Shaker Body Diameter			φmm	550
	Mass			kg	900
Power Amplifier	Model				EM1HAG-i20
	Maximum Output			kVA	10
	Dimensions		Width	mm	580
			Height	mm	1750
			Depth	mm	850
	Mass			kg	330
Controller	Vibration Controller				See Vibration Controller K2
Cooling	Cooling Method				Air cooling
	Blower	Dimensions	Width	mm	492
			Height	mm	1128
			Depth	mm	625
		Mass		kg	70
		Wattage		kw	1.5
		Duct Hose Diameter		φ	125

*Random force ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements.

*Power supply: 3-phase 200/220/380/400/415 V (A74 is only AC380/400/415 V), 50/60 Hz. A transformer is required for other supply voltages.

*Breaker capacity for AC 200 V.

*Specification above applies to 60 Hz. Dimensions change for 50 Hz.

*For high velocity option

*The specification shows the maximum system performance. For long-duration tests, system must be de-rated up to 70%.

*Continuous use at maximum levels may cause failure. Please contact IMV if your system operates at more than 70%.

*For random vibration tests, please set the test definition of the peak value of acceleration waveform to operate at less than the maximum acceleration of shock.

*Frequency range values vary according to the sensor and vibration controller.

* Armature mass and acceleration may change when a chamber is added.

*Mass and dimensions may change for CE-marked systems.

US:ECO

System Model				Unit	i220/EM1HAG
System Specifications	Frequency Range			Hz	0-3300
	Rated Force	Sine		lbf	1800
		Random		lbf rms	1800
		Shock		lbf	3600
		High Velocity Shock		lbf	2250
	Maximum Acc.	Sine		g	127
		Random		g rms	89
		Shock		g peak	204
		High Velocity Shock		g peak	159
	Maximum Vel.	Sine		in/s	87
		Shock		in/s peak	87
		High Velocity Shock		in/s peak	137
	Maximum Dsp.	Sine		inp-p	2.0
		High Velocity Shock		inp-p	2.0
	Maximum Travel			inp-p	2.4
	Maximum Load			lbs	440
	Power Requirements			kVA	16.4
	Breaker Capacity			A	30
Vibration Generator	Model				i220
	Armature Mass			lbs	14.1
	Armature Diameter			φin	7.5
	Allowable Eccentric Moment			lbf in	2600
	Dimensions		Width	in	40
			Height	in	36
			Depth	in	22
	Shaker Body Diameter			φin	22
	Mass			lbs	1984
Power Amplifier	Model				EM1HAG-i20
	Maximum Output			kVA	10
	Amplifier Bay (s)				1
	Dimensions		Width	in	23
			Height	in	69
			Depth	in	33
	Mass			lbs	728
Controller	Vibration Controller				See Vibration Controller K2
Cooling	Cooling Method				Air cooling
	Blower	Dimensions	Width	in	20
			Height	in	45
			Depth	in	25
		Mass		lbs	155
		Wattage		kw	1.5
		Duct Hose Diameter		φ	125

* Random force ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements.

* Power supply: 3-phase 220/480V, 60Hz. A transformer is required for other supply voltages.

* Breaker capacity for 480V.

* Specification above applies to 60 Hz. Dimensions change for 50 Hz.

* For high-velocity option.

* For random vibration tests, please set the test definition of the peak value of acceleration waveform to operate at less than the maximum acceleration of shock.

* Frequency range values vary according to sensor and vibration controller.

* Armature mass and acceleration may change when a chamber is added.

* Mass and dimensions may change for CE-marked systems.

Brand	IMV
Application	Electro Dynamic Vibration Test System
Sub Categories	Reliability & Durability Test and Measurements

I-Series (Standard Range)

Features

Related products

Sign in