Easy-to-Use Charge Plate Monitor For Manual or Automated Testing
Advanced Energy’s Monroe 288C is the first charged plate monitor to offer onboard data storage to automate ionization system testing. The Monroe 288C performs customary manual tests or a series of automated decay and balance tests.
- Electrometer Dynamic Range: ±1200 V
- Charge Plate Size: 15 x 15 cm (6 x 6 in)
- Data Storage: 1500 Readings
Overview
The MonroeTM 288C is an easy-to-use, charge plate monitor for manual or automated testing. All test parameters are programmable, allowing tests to be optimized and not dictated by equipment limitations.
Once programmed, the Monroe 288C will perform a series of tests automatically: ± decays, balance, balance peaks, temperature, humidity, time/date are stored and may be reviewed via the display or downloaded to a PC. The included software permits the user to define and name ionizer locations, test setups, and sequences and upload them to the CPM. All of these features result in a flexible, easy-to-use instrument that facilitates audits while minimizing errors.
Benefits
- Perform manual and automated testing of decay and balance
- Store up to 1500 tests total (not for each location), 600 locations, and 4 test protocols
- Use the large, easy-to-read, high contrast LCD display
- Configure operating parameters
- Utilize soft keys for highly intuitive programming
Features
- Internal battery for portable operation
- Detachable 6 x 6-inch plate with optional 1 x 1 in and 3 x 3 in plates
- Built-in temperature and humidity sensors
- Auto-ranging to 0.1V resolution below 100V Meets ESD Association Standard ANSI / ESD STM 3.1
- CE compliant
-
Performance
Range
±1200 V
Bandwidth
-3db @ 1Khz 20 V p-p
-3db @ 10Hz 2000 V p-pNoise
< 12 mV rms
-
Charge Plate
Capacitance
20 pF ± 2 pF
Resolution
Settable to 1 V increments
Accuracy
0.3% of setting ±2.5 V
-
Mechanical
Battery Life
Typ > 6 hours
Size
280 x 229 x 152 mm (11 x 9 x 6 in)
Weight
12.5 lb (5.7 kg)
