M13-211 is a pulse filter.
This device is a One-shot timer for signal entering the Pulse Input.
Multiple Pulse input received within a Preset time (0.1s – 999.9s)
will generate a one-shot pulse output.
| Function | Pulse Filter |
| Display | 4-Digit, 7-Segment LCD / Digit Size：7mm |
| Setting Range | 00:01 – 99:59(mm:ss) |
| Input | Pulse Input(Input) Key Protect(K/P) |
| Input Type | Non-contact / Reed Input: Open Collector Input L<2V(Sink Current approx. 1mA) |
| Input Frequency | 10Hz(Pulse Input) |
| Output | Non-contact Output:NPN Open Collector(DC30V 100mA max.) Relay Output:1c Contact(AC/DC30V 0.5A max.)(M13-210 only) |
| Output Type | One-shot(100ms) |
| Output Delay | 25msec |
| Key Protect | via Key Protect Input |
| Memory | E²PROM(10 years Data Retention; 10,000 Re-write Cycles) |
| Power Supply | DC12 – 24V(-15% / +10%) |
| Power Consumption | approx. 0.4W(at DC24V) |
| Operating Humidity | 45 – 85%RH(non-condensing) |
| Operating Temperature | -10 – +50°C(non-freezing) |
| Storage Temperature | -20 – +60°C(non-freezing) |
| Noise Immunity | Square-wave Noise from Noise Simulator Power Supply Terminal: ±600V / Input Terminal: ±500V |
| Vibration Resistance | Malfunction: 10 – 55Hz peak amplitude 0.15mm 3-directiona 10 minutes Endurance: 10 – 55Hz peak amplitude 0.375mm 3-directional 2 hours |
| Weight | approx. 110g |
