Panel – F90 Series

Name: Panel – F90 Series
Brand: Line Seiki
Rating: 4.9 (50 reviews)

Thương hiệu : Line Seiki

Liên hệ báo giá Hotline/ Zalo: 0911.559.559 Hotline/ Zalo: 0911.559.559

Cam kết và Chính sách của TECHNO

Cam kết 100% Hàng chính hãng
Chất lượng cao, đáp ứng đa dạng nhu cầu
Tư vấn kỹ thuật toàn diện và chuyên sâu
Chính sách bảo hành và hỗ trợ nhanh chóng

Thông số kỹ thuật

Mô tả sản phẩm

Thông tin NSX

Catalogue

The F90 Series is a panel mounted Rate Indicator/Controller. It has a 6-digit red LED display, 14.22×7.8mm digit size, easy to see measured value even at dimly lit places. The Controller type is fully programmable thru the front panel keys. Panel size is a DIN 48×96 with a Panel Cut-out size of 45x92mm. Controller model has 3 output types – Upper/Lower Limit output, Analog and BCD output. Other features include Prescale function, multi-decimal point position and Key Lock function. Built-in memory enables the unit to remember the last measured value even at accidental cut of power supply.

Model	F90-101	F90-103	F90-201	F90-203
Type	MONITOR TYPE		UPPER / LOWER LIMIT PRESET TYPE
Output Option	–	Analog	–	Analog
Display	Red LED 14.22 x 7.8mm		Measuring Display : Red LED 10.5 x 5.5mm Preset Display : Green LED 8.0 x 4.0 mm
Number of Digits	6
Display Range	0.0001 – 999999
Decimal Point Position	4th decimal point position max.
Scale Range	0.11 – 20KHz (1pulse / revolution : 6.6667 – 120000rpm)
Preset Level	–		Upper / Lower Limit
Measuring Method	1/TAU standard sampling : X’tal 2MHz ±50ppm
Measuring Accuracy	±0.008% reading ±1 digit (multiplier = 1.0000, divider = 1, -5 – +50°C )
Sampling Time	0.5 – 10 seconds (sampling time is changed automatically by pulse interval)
Up-date Time	Every sampling or 1 – 99seconds (maximum)
Input Signal	Contact inpu t: sink current 2mA Open collector input sink current : 2mA L : 0 – 1.9V Voltage input : input impedance 3KΩ L : 0 – 1.9V H : 3.5 – 30V (P-P3.5V min.) Magnetic sensor input : input impedance 3KΩ L : -0.6 – -17V H : 0.6 – 17V
Input Frequency	Contact input 0.11 – 25Hz minimum pulse width 20msec Open collector or Voltage input 0.11H – 20KHz minimum pulse width 25msec Magnetic sensor inpu 0.11 – 20KHz minimum pulse width 25msec (L : -0.6Vmax. / H : 0.6Vmin)
Prescale	Multiplier : 0.0001 – 100 Divider : 1/1 – 1/9999 (can be used at the same time)
Overflow	At every sampling, when the measured data is over 6 digits, “—–” is displayed
Memory	Prescale value, upper/lower limit value and up date time are retained for 10 yrs. by E²PROM (rewrite 10000 times)
Keylock	Prescale value, upper/lower limit value (exclude monitor type) and up date time are inhibited to be changed. Contact input, Open collector input (sink current 7mA L : 2Vmax)
Output Inhibition	–		Upper / Lower Limit output inhibition Contact input, Open Collector input (sink current 7mA L : 2Vmax)
Upper / Lower Output	–		Type 1C relay contact (AC250V/0.5A or DC30V/2A)
BCD Output	Parallel open collector negative logic output Each output 30VDC/20mA/50mW max. Output saturation voltage 0.75V (typ)/20mA Half pitch 36P connector : JAE TX20A-36R-D2LT-A1L Adapter Plug : JAE TX20A-36PH1-D2P1 1m cable
Analog Output	Frequency voltage converter method Voltage Output : 0.1 – 10V (1KΩ min.) ±0.5%FS Current Output : 4.16 – 20mA (500W max.) ±0.5%FS Output Ripple : 20mVp-p max. 3 Ranges: 20 – 200Hz, 200 – 2KHz, 200 – 20KHz selectable by dip-switches (Select voltage or current output).
Sensor Supply Power Source	12VDC ±10% 100mA max. (Analog output is 50mA maximum)
Power Supply	100 – 240VAC -15% +10% (85 – 264VAC) 50/60Hz
Power Consumption	Approximately 6VA
Operating Temperature	-5 – +50°C (Non-freezing)
Operating Humidity	45 – 85%RH (Non-condensing)
Weight	Approximately 280g

Liên hệ báo giá Hotline/ Zalo: 0911.559.559 Hotline/ Zalo: 0911.559.559

Panel – F90 Series

Sản phẩm tương tự