Handheld Thermometer HR-1351K/ HR-1351E

Name: Handheld Thermometer HR-1351K/ HR-1351E
Brand: Anritsu Meter
Rating: 4.9 (50 reviews)

Thương hiệu : Anritsu Meter

Liên hệ báo giá Hotline/ Zalo: 0911.559.559 Hotline/ Zalo: 0911.559.559

Cam kết và Chính sách của TECHNO

Cam kết 100% Hàng chính hãng
Chất lượng cao, đáp ứng đa dạng nhu cầu
Tư vấn kỹ thuật toàn diện và chuyên sâu
Chính sách bảo hành và hỗ trợ nhanh chóng

Thông số kỹ thuật

Mô tả sản phẩm

Thông tin NSX

Catalogue

Nội dung bài viết

Measurement Range：K -200 to 1370°C / E -200 to 800°C

HOLD
The thermometer stops measurement
by the HOLD key and holds the present readings.

Auto power-off
The thermometer will turn the power off automatically after 5minutes.

Resolution change
Press the［RESO］ key to change the resolution of readings.

P/V Hold
The peak (Max.) value and the valley (Min.) value can be displayed by the P/V HOLD key on the sub-display.

Backlight
The backlight will operate by the Backlight key and the LCD display will be visible even in a dark place.

Calibration
The displayed value can be adjusted the CAL SET key.

Alarm output
The thermometer gives an alarm when readings go beyond the high or low limits.

Analog output type
1ｍV/°C

(Temperature probes not included)

Specifications

Model			HR-1351
Display			LCD
Waterproof specifications			–
Input connector			ANP
Input type			Thermocouple Input: Type E, K
Channel			1ch
Signal source resistance			MAX.1k ohm
Measurement Range	1°C Resolution	E	-200 to 800°C
		K	-200 to 1370°C
	0.1°C Resolution	E	-104.9 to 504.9°C (Switches automatically to 1°C resolution range when messured temperatures fall outside the 0.1°C resolution range.)
		K	-104.9 to 504.9°C (Switches automatically to 1°C resolution range when messured temperatures fall outside the 0.1°C resolution range.)
Measurement Accuracy	1°C Resolution	0°C to	± (0.1% of reading +1°C)
		to 0°C	± (0.5% of reading +1°C)
	0.1°C Resolution	0°C to	± (0.05% of reading + 0.2°C)
		to 0°C	± (0.15% of reading + 0.2°C)
Reference junction compensation accuracy			±0.2°C at 25°C±10°C
Temperature Coefficient*1			±0.02×Δt°C (Add the value obtained by multiplying the excess temp.Δt[°C] by a coefficient to the total accuracy. e.g. ±0.5°C is added at room temp. of 0°C or 50°C)
Operation Environment			0 to 50°C, 0 to 80%RH (Non condensing)
Storage Environment			-20 to 50°C, 0 to 85%RH (Non condensing)
Battery life			approx.20h＊2
Power supply(Dry battery)			4 AA Alkaline batteries
Power supply(AC power) option			available
Sampling rate			approx.200ms
Linearlizer			Digital Linearizer method (Compliant with JIS C1602-2015)
Dimensions(mm)			approx. 82(w)×166(H)×36(D) [Protruded parts excluded]
Weight			approx. 350g [Include Batteries]
Supplied accessories			Manual,Test report,Soft case,
			Hand strap,4 AA Alkaline batteries
Optional accessories			Alarm output cable, Analog output cable
Alarm output			TABLE1
Analog output			TABLE2
Compatible standards			EMC：EN61326-1：2013, EN 61326-2-1：2013 classA Table2（ Industrial） RoHS：IEC EN 63000：2018

*1 Only when the temp. exceeds 25°C±10°C *2 Approx.400 hours when the analog output is switched always off.

※ Details of typeJ,T,R(option)

Table1 Alarm Output

Output Pattern	Upper Limit	Lower Limit
More than upper limit	Close	Open
Between upper and lower limit	Open	Open
Less than lower limit	Open	Close
Alarm output cable	ANGHA-1.5(accessory)

※ The alarm output uses a photo MOS relay. ON resistance (internal protection resistance 400Ω, photo MOS relay ON resistance 50Ω） Drive voltage MAX.25V

TABLE2 Analog output

Rate	1ｍV/°C(1°C resolution)	10ｍV/°C(0.1°Cresolution)
Range	The entire measurement range with 1°C resolution	The entire measurement range with 0.1°C resolution
Analog output conversion accuracy(under 25°C±10°C)	Equivalent to the value obtained by adding ±1°C(1mV)to the measurement accuracy	Equivalent to the value obtained by adding ±0.1°C(1mV)to the measurement accuracy
Temperature conficient*1	±(0.1ｍV/°C×Δt°C) e.g.±1.5ｍV(2°C) is added at room temp.of 0°C or 50°C	±(0.1ｍV/°C×Δt°C) e.g.±1.5ｍV(0.2°C) is added at room temp.of 0°C or 50°C
When the probe is disconnected	Approx.-2.3V
Measurement range+over	Approx.5.1V
Measurement range-over	Approx.-2.2V
Insulation resistance	100MΩ/DC500V(between input and analog output)
Withstand voltage	300Vpｰp(between input and analog output)
Cable	ANGHA-1.5(accessory)

＊1 When the temperature exceeds 25°C±10°C ,multiply the excess temperature Δt°C by a coefficient and add it to the analog output conversion accuracy.
※Regarding analog output: The displayed value is D/A converted and output.The update timing is about 200ms, and the output resolution isin 1mV units.When not using the analog output, turn off the analog output.

Liên hệ báo giá Hotline/ Zalo: 0911.559.559 Hotline/ Zalo: 0911.559.559

Handheld Thermometer HR-1351K/ HR-1351E

Specifications

Table1 Alarm Output

TABLE2 Analog output

Sản phẩm tương tự