Overview
The DV type distributing valve is used in dual line systems. Lubricant is reliably supplied to each of the lubrication points by the pressure of the lubricant that is alternately fed under pressure from the main supply line.
Operation of the distributing valve can be checked on the operation indicator. Also, the oil amount can be adjusted as desired by the adjusting screw.
Features
• Accurate Lubrication
Sliding sections have been finished with high accuracy to ensure that metered lubrication can be accurately performed.
• Solid, Outstanding Durability
• Max. Operating Pressure 21 MPa
Application of higher pressure improves lubrication reliability and enables lubrication over a wider area.
• Lubrication amount can be adjusted and operation can be inspected at each discharging port.
Specifications
| Distributing valve size | 30 | 40 | 50 | 60 |
| Max. operating pressure (MPa) | 21 | |||
| Pressure resistance (MPa) | 31.5 | |||
| Grease Used | Centralized lubricating grease NLGI consistency #0 to #2 | |||
| Min. operating pressure (MPa)） | 1 | 1 | 1 | 1 |
| Discharge quantity (cm3/stroke max.) | 1.2 | 2.5 | 5.0 | 14.0 |
| (cm3/stroke min.) | 0.2 | 0.6 | 1.2 | 3.0 |
| Adjustment amount per rotation of adjusting screw (cm3) | 0.06 | 0.10 | 0.15 | 0.68 |
| Loss (cm3) | 0.50 | 0.55 | 0.63 | 0.63 |
| Accessories | Cross recessed pan head screw, hexagon nut, and spring washer | |||
| M8×60 | M8×60 | M8×65 | M8×75 | |
Note) • “Loss” refers to the amount of oil required for operating the pilot piston.
Explanation of Model Symbols
