CS-020W (Trolley grease feeder)

Name: CS-020W (Trolley grease feeder)
Brand: Daikin
Rating: 4.9 (50 reviews)

Thương hiệu : Daikin

Liên hệ báo giá Hotline/ Zalo: 0911.559.559 Hotline/ Zalo: 0911.559.559

Cam kết và Chính sách của TECHNO

Cam kết 100% Hàng chính hãng
Chất lượng cao, đáp ứng đa dạng nhu cầu
Tư vấn kỹ thuật toàn diện và chuyên sâu
Chính sách bảo hành và hỗ trợ nhanh chóng

Thông số kỹ thuật

Mô tả sản phẩm

Thông tin NSX

Catalogue

Nội dung bài viết

• A proprietary control circuit enables greasing over a wide range, from low through to high speeds.
• A new type of push mechanism (fixed greasing amount system) and a lighter weight greasing head improve conveyor trackability, which ensures reliable lubrication by small quantities of grease.
• A new type of guide lever mechanism makes operation even more reliable.
• The adopted breakage prevention structure features, for example, a flexible push mechanism that greases the left and right rollers at the same time while moving in parallel with the conveyor.

Air pressure (MPa)		0.4 to 0.5
Lubricant supply pressure (MPa)		3 to 10
Air consumption (Nr/cycle)		1/at0.4MPa
Conveyor speed x roller pitch		See figure at right
Roller horizontal run-out tolerance (mm)		±6
Roller vertical run-out tolerance (mm)		±3
Guide diameter	Arm guide (mm)	24 to 60
	Roller guide (mm)	50 to 82
Roller diameter (mm)		50 to 82
Grease nipple model		JIS B1575 A type or roller built-in type
Discharge quantity (cm3/stroke）		0.35
Lubricant used		NLGI consistency #0 to #2
Ambient temperature (°C)		5 to 60
Weight (kg)		17

Remarks
• The above guide and roller diameters are used as the standard. Consult us separately if you want non-standard guides and rollers produced.• The above grease nipple is used as the standard. Consult us separately if you want non-standard grease nipples produced.

• Let the horizontal axis be the roller pitch (P) and the vertical axis be the conveyor speed (S), and an area be formed by pitch 100 mm or more and speed 18 m/min or less. This greaser can be used when the intersection point of pitch and conveyor speed is in the possible greasing range.

(Example) When the roller pitch P is 150 mm and conveyor speed S is 5 m/min, the intersection point is found on the right-side area, as shown by the dotted line in the diagram, and so lubrication is possible.