Specifications
(50／60Hz)
| Mounting type | Side-mounting |
|---|---|
| Cooling capacity(W) | 800/1000 |
| Setting Temperature Range(℃) | 25～45 |
| Use Area Temperature(℃) | 20～55 |
| Use Area Humidity(%RH) | 10～80 (No condensation) |
| External dimensions(mm) | H730×W300×D230 |
| Weight(kg) | 22 |
| Coating Color | Munsell 5Y 7/1 Equivalent color of light beige |
| Rated Voltage(V) | Single-phase AC200 |
| Consumption Current: Rated(A) | 2.2/1.8 |
| Consumption Current: MAX(A) | 2.6/2.9 |
| Starting Current(A) | 7.5/7.1 |
| Consumption wattage: Rated(W) | 340/350 |
| Consumption wattage: MAX(W) | 450/560 |
| Cooling water / Temperature range (℃) | 10～40 |
| Cooling water / Flow rate (ℓ/min) | 5 |
| Cooling water / Pressure (Mpa) | 0.2～0.5 |
| Noise Resistance | LEVEL4 by Fast Transient / Burst Immunity Test |
| Vibration Resistance | 5Hz frequency 20mm total amplitude |
| Refrigerant / Fill ration(g) | R134a 100ｇ |
| Noise (dB (A)) | Approx. 57/60 |
| External Output | Alarm output (No-voltage/normal open: resistive load 250V 2A) |
| Display | Internal temperature/Error display LED/RUN LED |
Note）
Cooling capacity : Rated capacity value when internal temperature is 35°C, Cooling water inlet temperature 35 ℃, supply water amount 7.2 / 7.9ℓ / min. (measurement conditions: JIS-C-9612 air enthalpy method)）
Rating Value : 35°C use area temperature, use area humidity RH 40%.
MAX value: use area temperature at the maximum use area temperature allowed, use area humidity of 40%RH.
Use the product keeping the use power supply and voltage; within ±10% of rated power supply and rated voltage.
Reading an instruction manual well certainly before use and please use it right.
Accessories list
| Drain hose | 3m |
|---|---|
| Hose band | 1 |
| Instruction manual | 1 |
Replacement parts list
| Condenser side Fan | Circulating fan for NW1120L |
|---|---|
| Control PCB | Substrate for NW1120 |
Note: Check with our sales representative as the delivery lead time varies depending on the inventory status.
*Note that the model, specifications and other details described are subject to change without notice.
External dimensions
Diagram of Panel Cutout
[Standard panel cut]*Figure seen from control board outside.
*Please keep screw pace on the occasion of processing.
