RV-10000A Tuning Fork Vibro Rheometer

Brand	AND
Sub Categories	Material Inspection and Analysis
Application	Rheometers

Category: Test and Measurements

DESCRIPTION

Finally, a cure for poor repeatability in low viscosity measurements

Features

Repeatability as high as 1% of the measured value (by S.D.) even with low viscosity sample fluids

Shear rate changes by controlling the sensor plate vibration amplitude

Easy setup/cleaning and very quick measurement (stabilization in 20 seconds)

Wide continuous measurement range (max. 0.3 to 25,000 mPa·s)

Little interference to the sample fluid

Possible to measure fluids in motion

Comes with a special controller for:
– Automatically changing the amplitude (shear rate) and capturing data in the manner set by the user
– Real-time graphing of viscosity variation with time, temperature, as well as shear rate
– Saving results (in CSV format) and graph screens (as JPEG images) in USB flash drives

Controller section

User calibration function, including a simplified calibration using purified water

Sample fluid temperature control using the provided water jacket

Anti-corrosive, titanium sensor plates and temperature sensor

X-Y-Z stage, anti-vibration table (AD-1671A), positioning stopper, etc., as standard accessories

External Input / Output

RS-232C interface
USB (1.1) interface

Accessories

Click here to see the complete accessory list.

	Sample cup: 45 ml, polycarbonate × 5 10 ml, with cover, polycarbonate × 5 13 ml, glass × 2 Glass sample cup holder, stainless steel × 1 Water jacket × 1
Standard Cup Set

Also available…

RV-10000Tuning Fork Vibro Rheometer (Basic Model)

Amplitude (shear rate) manually alterable to eight levels

Windows Communication Tools WinCT-Viscosity and a serial-USB converter provided as standard (the special controller is not available with the basic model)

Example of Measurement Display Using WinCT-Viscosity

Controller section

Display	TFT color LCD with backlight (7 inches, 800 × 480 dots)
Data transmission	RS-232C × 3, USB (1.1) × 2^*6
Power supply / consumption	AC adapter / approx. 30 VA
External dimensions	203 (W) × 153 (D) × 58 (H) mm, excluding protrusions
Net weight	Approx. 1.1 kg
Standard accessories	AC adapter × 1, touch pen with holder × 1, stand attachment × 1

*6 For inserting USB flash drives only (the two slots cannot be used at the same time)

SPECIFICATION

Main section

Measurement method	Tuning Fork Vibro Method (Natural Frequency at 30Hz)
Amplitude range	0.07 to 1.2 mm (peak-to-peak at the tip of the sensor plate)
Measurable viscosity range^*1	0.07 mm ≤ amplitude < 0.1 mm	2,000 to 25,000 mPa·s
	0.1 mm ≤ amplitude < 0.2 mm	20 to 25,000 mPa·s
	Amplitude = 0.2 mm	0.3 to 25,000 mPa·s
	0.2 mm < amplitude ≤ 0.4 mm	0.3 to 12,000 mPa·s
	0.4 mm < amplitude ≤ 0.8 mm	0.3 to 5,000 mPa·s
	0.8 mm < amplitude ≤ 1.2 mm	0.3 to 3,000 mPa·s
Repeatability^23	1% of the measured value (standard deviation)
Accuracy^24	±3% (1 to 1000 mPa•s) when the amplitude is set to 0.4 mm
Minimum display	Range (mPa·s)	Minimum display (mPa·s)	Minimum display (Pa·s)
	0.3 to 10	0.01	0.0001
	10 to 100	0.1	0.0001
	100 to 1000	1	0.001
	1000 to 25000	10^*5	0.01
Viscosity measurement unit	mPa·s, Pa·s, cP, P
Minimum sample amount	10 ml
Temperature measurement	0 to 99°C/0.1°C (32 to 210.2°F/0.1°F); 100 to 160°C/1°C (212 to 320°F/1°F)
Display	Vacuum Fluorescent Display (VFD)
Power supply / consumption	AC adapter / approx. 14 VA (including the AC adapter)
External dimensions / weight	Sensor unit: 112 (W) × 132 (D) × 291(H) mm / approx. 0.8 kg
	Display unit: 238 (W) × 132 (D) × 170 (H) mm / approx. 1.3 kg
	Stand unit: 296 (W) × 314 (D) × 536 (H) mm / approx. 4.6 kg
Standard accessories	AC adapter × 1, connection cable × 1, sample cup (capacity: 45 ml) × 5, small sample cup (capacity: 10 ml) × 5, small sample cup cover × 5, glass sample cup (capacity: 13 ml) × 2, glass sample cup holder × 1, water jacket × 1, WinCT-Viscosity × 1, RS-232C cable × 1, serial/USB converter × 1, stand for securing the sensor unit × 1, X-Y-Z stage × 1, positioning stopper × 1, anti-vibration table × 1

*1 The basic model (RV-10000) has no controller section and the sensor plate amplitude can only be altered to eight levels (0.07 / 0.1 / 0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 mm) by manually pressing a key on the display unit.
*2 When the sample cup (45 ml) is used.
*3 Repetitive measurement with the sensor plates remaining in the sample fluid
*4 The value after calibration using a viscosity standard liquid at a temperature range between 20°C and 30°C with no condensation
*5 The unit switches to Pa·s.