Specifications
| Mount type | Side-mount |
|---|---|
| cooling method | Electronic cooling system with Peltier element |
| Cooling capability (W) | 85 |
| Dehumidifying power (g/h) | 70 |
| Use Area Temperature (°C) | 10～45 |
| Use Area Humidity (%RH) | 10～85 (No condensation) |
| External dimensions (mm) | H395×W250×D175 |
| Weight (kg) | 9.5 |
| Coating Color | Y22-85B Ivory or suitable color |
| Rated Voltage (V) | Single-phase AC100～240 |
| Consumption Current (A) | Rated: 2.7 |
| Withstand voltage | 1000V for 1 minute (transformer capacity 500VA) |
| Vibration Resistance | 5Hz frequency 20mm total amplitude |
| Electric wave regulation | VCCI (Class A compliant) |
| Dust prevention / dust proof protection class | Equivalent to IP54 (internal circulation route) |
| Noise (dB (A)) | Approx. 59 |
| Display | Power lamp (green) |
Note）
Cooling capacity: According to the heater equilibrium formula at an ambient temperature of 25 ℃ and in a measurement booth of size H500×W300×D500.
Current consumption/power consumption: Value at an ambient temperature of 25 ℃, ambient humidity of 40％ and panel internal temperature of 25 ℃ and voltage of 100 V.
Permissible ambient temperature: Risk of freezing when operating with no load at an ambient temperature of 10 ℃ or lower.
Dehumidification capacity: Capacity at an ambient temperature of 30 °C and humidity of 80%.
Accessories list
| Mounting bolt for main unit | 4 (M5×L20) |
|---|---|
| Drain hose | 0.5m |
| Insulation lock ties | 1 |
| Spacer | 4 |
| Instruction manual | 1 |
Maintenance parts list
| Filter cover | NRC-FC-100AL (1 piece) |
|---|---|
| Filter | ENC-71 (10 pieces per set) |
External dimensions
(1) Alarm Output Line : Cord length 2m
Diagram of Panel Cutout (Standard panel cut)
*Figure seen from control board outside.
*Please keep screw pace on the occasion of processing.
*Standard panel cut will not be changed even if a model change is carried out (some exceptions apply).
