Overview
DW type distributing valve is used for dual line system. The ports are doubled in number from single discharging type (1 port/element) to dual discharging type (2 ports/element) for saving space.
Features
• Double the Number of Discharging Ports
Only half the conventional number of distributing valves is needed for the required number of lubricating ports. This simplifies installation and the piping configuration.
• Odd Number of Ports Easily Supported
Dual discharging can be easily changed to single discharging by simply reassembling the cross-port hexagon socket head flat plug on the right end to the discharging port. (See below for details on change method.)
• Maximum Operating Pressure of 21 MPa
Application of higher pressure improves lubrication reliability and enables lubrication over a wider area.
• Same Installation Dimensions
The installation dimensions of DW-30, 40 and 50 types are all the same. This means that connections between distributing valves and resizing can be easily performed.
• Solid, Outstanding Durability
Specifications
| Distributing valve size | 20 | 30 | 40 | 50 |
| Max. operating pressure (MPa) | 21 | |||
| Pressure resistance (MPa) | 31.5 | |||
| Grease Used | Centralized lubricating grease NLGI consistency #0 to #2 | |||
| Min. operating pressure (MPa) | 1.8 | 1 | 1 | 1 |
| Discharge quantity (cm3/stroke max.) | 0.6 | 1.2 | 2.5 | 5.0 |
| (cm3/stroke min.) | 0.15 | 0.2 | 0.6 | 1.2 |
| Adjustment amount per rotation of adjusting screw (cm) | 0.04 | 0.06 | 0.10 | 0.15 |
| Loss (cm3) | 0.17 | 0.20 | 0.20 | 0.20 |
Note) “Loss” refers to the amount of oil required for operating the pilot piston.When this distributing valve is used for oil, set the pressure below 10MPa.
Explanation of Model Symbols
