Features
• Adoption of an air type elevator unit allows for the drum to be easily replaced.
• The mechanically operated safety stopper safely and reliably prevents the drum can from falling off.
• A wide range of options is available.
• Performance and installation compatibility with previous drum can pump models.
• Applicable container: 200 kg drum (JIS product)
Specifications
| Model | AELBPR08 | AELBPR10 | AELBPR20 | AELBPR40 | |
| Pump | Discharge quantity （cm3/min（50/60Hz）） |
75/90 | 100/120 | 158/190 | 316/380 |
| Max. operating pressure (MPa) | 21 | ||||
| Safety valve pressure (MPa) | 25 | ||||
| Motor specifications | 0.2 kW (speed reduction ratio 1/59) |
0.2 kW (speed reduction ratio 1/43) |
0.4 kW (speed reduction ratio 1/21) |
||
| Grease used | NLGI #0 to #2 (Note, however, that the consistency will be 240 or more at the operating temperature.) |
||||
| Elevator | Supply air pressure (MPa) | 0.4～0.5 | |||
| Liftable weight (kg) | 80 | ||||
| Total raise stroke （mm） |
950 | ||||
| Total unit weight （kg） | Single line | 185 | |||
| Dual line | 195 | ||||
Note) When replacing the drum can, because the follower plate is tightly attached to the drum, ensure that air is supplied before removal.
Note) Residual grease amount is set at 8 L at the time of shipment. Amount can be changed upon arrival.
Explanation of Model Symbols
