The Optiv Lite 3.2.2 / 4.3.2 combines optical and tactile measurement in one system. The system supports multisensor measurements using the vision sensor (CCD colour camera), laser system and the tactile probing. The Optiv Lite provides easy pallet station integration with good accessibility to the measuring table from all sides.
Measurement Software is Metus Vision Measuring Software
Fields of Application
• Shop floor and inspection room
• Versatile geometry measurements and GD&T analysis
Design
• Design principle:
»» Low-vibration granite construction with proven Cross Table Design
»» Highly rigid weight-optimised frame
• Guides:
»» Mechanical bearing for high rigidity and high precision
• Drives:
»» DC servo motors, power transmission via backlash free circulating ball screws
• Length measuring system:
»» Incremental optoelectronic length measuring system
• Resolution of the scales:
»» 0.05 μm
Measuring Range
Airborne Noise Emissions
• The A-weighted emission sound pressure level at operator’s position is less than 70db (A).
Environmental
• Air humidity 45%-75% RL, non-condensing
• Environmental temperature 20°C +/- 2°C
• Permissible temperature gradient 1.0°C/h, 2.0°C/d, 1.0°C/m
Throughput
• Maximum travelling speed:
»» Acceleration X, Y = 160mm/s2, Z = 250mm/s2
Vision Sensor
• Sensor for non-contact measurement of smallest and closely tolerance features:
»» 1.3 Mpixel Camera (H1280 * V720 Pixels)
• Maximum optical precision due to low distortion optics:
»» 6.5x motorised CNC zoom or 12x motorised CNC zoom
• Powerful image procession:
»» Fast precision video autofocus
»» Automatic feature detection, geometry and bad pixel video filters
»» Contour scanning mode
»» Best fit routines
»» Auto tunes
»» Multi capture
»» RGB sensitivity adjustment for colour camera
Illumination for Vision Sensor
• Green LED back light
• 4 quadrant LED ring light (4 segment)
• Coaxial LED top light
• Laser pointer (simplifies feature navigation)
CNC Zoom
• Motorised zoom for continuous adjustment of field of view and resolution:
»» Standard (6.5x)
»» Option (12x)
Laser Sensor
• Available on Optiv Lite, Optiv Classic and Optiv Advance
Control Systems
• CNC controller:
»» 3 – 4 axes microprocessor CNC with Vector path control
Safety Regulations
• Safety equipment:
»» Axis drive via rolling ring drive with safety slip clutch
»» Scale signal monitoring
»» Protective covers for the axes drives
»» Collision protection for the touch trigger probes
Supply Data
• Input Voltage power supply 115-230V +/- 10%
• Frequency 50/60 Hz +/- 5%
• Power consumption (Max) 800VA
Optional Equipment
• Worktable, printer and monitors
