Overview
- A desktop precision force tester.
- Most suitable for connector evaluation test.
- Force minimum display 0.001 N (when 5N load cell is used).
- Display of displacement 0.001 mm.
- Most suitable for testing small (miniature) parts.
- Capable of switch feeling test also.
Examples of use
- Switch feeling test (when optional CF card V-103A is used)
- Electronic device properties evaluation test
- Connector evaluation test
- Bending test at preset displacement
Specifications
| MODEL-1605VCL | |
| Max. force | 500N（50kgf） |
| Force accuracy | Depends on the load cell used. |
| Force measuring amplifier | MODEL-1016C |
| Controller | Built in |
| Test speed | 0.5～600mm/min |
| Speed changing | 15 steps or stepless |
| Stroke | 250 mm; when linear gage is used, 30 mm |
| Distance between test center and column | 100mm |
| Table size | W475×D150mm M10×1.5 |
| Drive motor | Servo motor |
| Detector | Rotary encoder/linear gage selection |
| Display resolution | Rotary encoder 0.01 mm, linear gage 0.001 mm |
| Dimensions | W480×H882×D375mm |
| Stand mass | Approx. 45 kg |
| Amplifier mass | Approx. 44 kg |
| Power supply | Single phase, 100 VAC – 240 VAC, 5A |
| Standard set | Tester, force measuring amplifier MODEL-1016C, load cell 1 piece, linear gage |
| Options | Additional load cell, jig/fixture, software, CF card for switch feeling test:V-103A / for creep test V-115A, ON/OFF detector Model 0219 |
