Portable Data Acquisition System OmnilightⅡ RM1100 Series

Brand	AND
Sub Categories	Lab tools
Application	Data Acquisition

Danh mục: Kiểm tra và Đo lường

GENERAL

Powerful and Dependable
RM1100 Excels in both Lab and Field

The Compact RM1100 Portable Data Recorder provides reliable data collection in challenging environments. A large 7-inch wide TFT LCD color touch screen display and refined GUI are ideal for quick Setup, Data Capture and Playback. Coupled with “Real Time”, “Memory” and SD Card recording modes plus up to 1µsec sampling rate, the RM1100 handles the most demanding high speed applications. Recording to SD Card or PC via Ethernet ensures long time continuous recording. Waveform printing is available with optional thermal printer. This AC or battery-operated recorder with rugged casing satisfies your different requirements for Predictive Maintenance, Quality Control, R&D, Automobile Driving Test and remote-controlled data acquisition.

DESCRIPTION

Features

Built Tough

Shock and drop resistance withstanding continuous vibration environments such as on-board vehicle tests (MIL-STD-810E 514.5C-1)
Wide operating temperatures: – 20℃ to +60℃ (-4°F to +140°F)
Compact & rugged case endures dusty and humid environments

Measurement Capability

Three measuring modes: “Real-Time” (Paper), “Memory” (Snap-Shot) and “Filing” (SD card storage)
High speed recording up to 1µs (1MS/s) to Memory or SD card
Long term recording to SD Card, PC or optional thermal printer

Signal Input up to 8 Channels

4 or 8-ch Voltage & Temperature & 4 or 8-point Logic signals

Excellent Portability

Long term continuous operation with rechargeable batteries
Can also be powered with 12 ~ 24V DC (vehicle) as well as AC
Lightweight (approx.1.5kg/ 3.3lbs) with full feature measurement capability

Outstanding Usability

Dynamic waveform display on 7″ wide & large LCD
Touch-screen with GUI offers easy operation

Shock Resistant Rugged Casing

Small, lightweight instruments can be prone to be slipped off from workbench or dropped during field test and transportation. RM1100’s good built-quality withstands harsh drop test (IEC60068-2-32 equivalent: 1 meter drop onto flat aluminium plate with the unit not being operated).*

Vibration Resistance Ensuring Stable Measurement for Automotive Testing etc.

RM1100 conforms to U.S. standard MIL-STD810E 514.5C-1 that is often required or desired for vehicle tests and other applications.

Flipped Monitor Display

180° Flip Display mode allows RM1100 installed and used upside down with cables hooked up to the bottom.
A flipped screen secures flexibility in connecting cables to suit the location where the product is installed. With optional mount (RM11-405), VESA standard display monitor arms, stands and brackets can be chosen for your installation.

Endurance in Dusty and Humid Conditions

The product design is tested to comply with IEC60529 standard with optional splash-resistant cover (RM11-402) installed for input terminals, power supply and connecting cables. When adequately installed, RM1100 can be used in tough environments with dust or mist in the air.

Wider Operating Temperatures: – 20℃ to +60℃ (-4°F to +140°F)

The extended operating temperature range lets you take RM1100 to perform testing in hot or cold environments, such as in thermostatic chambers, a certain proximity to furnace or other heat generating machineries, warehouses and automobiles in summer and winter. When used in-vehicle, for instance, RM1100 can be booted up to start recording right away. (Test confirms continuous and normal operation at -20℃ and +60℃ and RM1100 kept at -20℃ for 60 min with no power supplied can be turned on and be operated properly.)

* The above specifications and tests don’t guarantee failure-free or breakage-free performance.

Outstanding Usability

Dynamic waveform display on 7″ wide & large LCD
Touch-screen with GUI offers easy operation

Signal Input up to 8 Channel

RM1102 : Max 8 channels (voltage/ temperature) + 8 (logic)

Screw terminals for thermocouples and insulated BNC terminals for voltage allow easy connection.

Multiple Measuring Modes

Select from 3 measuring modes—’Memory Mode’ for saving fast events, ‘Filing Mode’ for saving data for long periods of time on an SD card, and ‘Real-time Mode’ for printing out waveforms using an external printer.

Memory mode

Data is saved to built-in memory (2M data/channel) at a maximum speed of 1µs (1M samples/second). Measured data is displayed, printed with an external printer, or saved on a SD card.

Memory Recording Times
Sampling speed	Memory (2M samples)
1µs	2sec
2µs	4sec
5µs	10sec
10µs	20sec
20µs	40sec
50µs	100sec
100µs	200sec
200µs	400sec
500µs	1000sec
1ms	33min18sec
2ms	1hr6min40sec
5ms	2hr46min40sec
10ms	5hr33min20sec

Filing mode

Filing mode provides long-time data saving to an SD card. Record data at fast sampling rates up to 1μs (1M samples/sec) with 1 channel or 10μs (100K samples/sec) simultaneously with eight (8) activated channels. This feature is excellent for high speed and long term continuous recording as well as post-measurement analysis.

Maximum Recording time to SD card
Sampling speed	8GB capacity
Sampling speed	With 1 channel	With 8 channels
1µs	1hr11min	–
2µs	2hr23min	–
5µs	5hr57min	44min44sec
10µs	11hr55min	1hr29min
20µs	23hr51min	2hr58min
50µs	2d 11hr39min	7hr27min
100µs	4d 23hr18min	14hr54min
200µs	9d 22hr36min	1d 05hr49min
500µs	24d 20hr31min	3d 02hr33min
1ms	49d 17hr02min	6d 05hr07min
2ms	99d 10hr05min	12d 10hr15min
5ms	248d 13hr13min	31d 01hr39min
10ms	497d 02hr27min	62d 03hr18min

* Above Recording times are for Sampled data. Recording times are doubled for Peak data sampling.

Real-time mode

Real-time recording mode allows acquired data to be sent directly to an external printer. Waveforms are shown on the color display screen using graphical pen tips. The chart paper speed may actively changed during recording using the touch screen.

Specifications:
Chart speed : 10mm/sec to 1mm/min
Recording Division : 1, 2, 4 divisions
Printing Density : 8dots/mm (time axis; horizontal)
8dots/mm (waveform axis : vertical)

SPECIFICATION

type		RM1102
Display		7 inch TFT LCD display (800 x 480 dots)
Operation panel		Touch panel
Input (Channel)	Voltage/Temperature	8ch
Input (Channel)	Logic	8ch
Sampling Speed (“Memory”, “Filing” mode)		with 1ch : 1MS/s (1µs) to 1S with 2ch : 500kS/s (2µs) to 1S with 3,4ch : 200kS/s (5µs) to 1S with 5~8ch : 100kS/s (10µs) to 1S with 9~ch : 50kS/s (20µs) to 1S
Trigger	Source Ch	8ch + Logic 8ch
	Detecting Mode	OR, AND, OFF, TIMER
	Kind of Trigger (Analog)	Level Trigger, Window
Storage Media	Internal Memory	2,000,000 data/ch
Storage Media	External Media	SD Card, corresponding to SDHC
Communication	Interface	LAN (10/100BASE-T) RS-232C (for Thermal printer)
External Control Terminals		REC IN, Trigger-In, Trigger-Out, Mark-In
Operating Environment	Temperature/Humidity	Temperature: -20 to 60℃, Humidity: 35 to 80%RH
	Vibration Resistance	compliant with MIL-STD-810E　514.5C-1 10Hz to 500Hz, Random wave 1hour each to X, Y, Z directions.
	Dust-proof / Splash-proof Construction	IP41(IEC60529) when optional RM11-402 Splash-resistant cover is used
Power Supply		AC adaptor: 100 to 240V AC (50/60Hz) (with AC adaptor) DC power: 12VDC (with power cable: 12 to 24V DC) Battery: AC adaptor is prior to battery operation
Other Specifications	Multiple Language menu	10 Languages (English, French, German, Italian, Japanese, Korean, Portuguese, Spanish, Simplified Chinese and Traditional Chinese)
	Timer Function	Start time, end time and interval can be set.
	Reverse Display	Provided
	Save/Readout of Settings	Measuring conditions can be saved–Internal memory: up to 4 conditions, SD card: up to available storage space.
	Screen Image Saving	Save screen image on SD card at BMP format (colored)
	LCD Monitor Brightness Control & Off	Provided
	Reading values between cursors	Max, min, average, p-p, RMS
	Key Lock	Provided