ESD Voltmeters and Sensors – Trek 520 Series

Name: ESD Voltmeters and Sensors – Trek 520 Series
Brand: Trek
Rating: 4.9 (50 reviews)

Thương hiệu : Trek

Liên hệ báo giá Hotline/ Zalo: 0911.559.559 Hotline/ Zalo: 0911.559.559

Cam kết và Chính sách của TECHNO

Cam kết 100% Hàng chính hãng
Chất lượng cao, đáp ứng đa dạng nhu cầu
Tư vấn kỹ thuật toàn diện và chuyên sâu
Chính sách bảo hành và hỗ trợ nhanh chóng

Thông số kỹ thuật

Mô tả sản phẩm

Thông tin NSX

Catalogue

Hand-Held Electrostatic Voltmeters for ESD Applications

Advanced Energy’s Trek Model 520 (±2 kV) and 523 (±20 kV) hand-held electrostatic voltmeters provide accurate, non-contacting measurements of electrostatic surface voltage. Both are ideal for ESD applications in either ionized or non-ionized environments.

Measurement Range
- 520: 0 to ±2 kV DC
- 523: 0 to ±20 kV DC
Measurement Accuracy: Better than ±5% of full scale over the recommended probe-to-surface spacing
Recommended spacing
- 520: 5 to 25 mm
- 523: 30 to 60 mm

Overview

The Trek® 520 voltmeters are not your typical hand-held field-meter. Their measurement technology provides surface voltage measurements that are essentially independent of the sensor probe-to-measured surface spacing.

Trek 520 is available in two versions. The 520-1 has a digital meter to display the measured voltage. The Trek 520-2 has an analog output monitor in addition to the digital display. This analog output monitor can be used to record the measured voltage or to view it on an oscilloscope. Always use the original grounding cord without any safety resistor; failure to do so will lead to measurement errors.

Benefits

Accurately measure surface voltage at a wide range of spacings
No need to maintain a fixed spacing

Features

Chopper stabilized for drift-free operation in ionized environments
NIST-traceable Certificate of Calibration provided with each unit

Performance

Measurement Range
- 520: 0 to ±2 kV DC
- 523: 0 to ±20 kV DC
Measurement Accuracy

Better than ±5% of full-scale over the recommended probe-to-surface spacing

Stability
- Drift with Time: Less than 600 ppm/hour, noncumulative
- Drift with Temperature: Less than 600 ppm/°C
Operating Time

Approximately 8 hours with a full battery

Sampling Rate

2.5 readings per second

Mechanical

H x W x D

31 x 59 x 173 mm (1.2 x 2.4 x 6.8 in)

Weight

200 g with battery (7 oz) with battery

Typical Applications
- Measurement of electrostatic surface charge build-up
- Manufacturing processes
- Electronic assembly testing
- Semiconductor material testing
- Dissipative material testing
- Automotive electronics testing
- ESD Auditing and troubleshooting