DCCS DC CURRENT SHUNT SERIES

Brand	IET Labs, Inc
Sub Categories	Lab tools
Application	Standard Resistor

Danh mục: Kiểm tra và Đo lường

GENERAL

Allows for high current calibration, up to 60 A
Resistances ranges from 100 µΩ – 1 kΩ
High accuracy 0.02%
Suitable for direct current & audio frequencies
Oil-filled design ensures great long term stability <0.01% over many years

DESCRIPTION

Current Shunts

The DCCS Series Current Shunts are calibration grade devices used for precise dc current measurements. They extend high accuracy measurements beyond the available limits of self-contained dc ammeters and the DCCS Current Shunts can be used as standard reference resistors.

The DCCS Current Shunts are low cost 4 terminal calibration resistors that combine high accuracy , class 0.02, long term stability and permanence of calibration in a compact unit. Constructed using carefully selected low temperature coefficient Manganin^® or Zeranin^® wire, depending on the value, and mounted to ensure mechanical stability, these current shunts will provide a cost-effective addition to any laboratory or workshop.

Main Areas of Application For The DCCS Current Shunt:

For tests of measuring bridges or electrical temperature measuring equipment
For a laboratory setup of a Wheatstone bridge
As shunt resistor for current measurement
As part of standard equipment in research laboratories

A variety of values are available from 100 µΩ – 1 kΩ.

SPECIFICATION

DCCS DC Current Shunt Specifications

Type	Nominal Value	Accuracy	Temperature Coefficient (ppm/ °C)	Max Current in Air	1 Year Stability	Nominal Voltage at Potential Terminals
DCCS/0.0001	100 µΩ	0.1 %	10	60 A	400 ppm	6 mV
DCCS/0.001	1 mΩ	0.05 %	10	30 A	50 ppm	30 mV
DCCS/0.01	10 mΩ	0.03 %	10	14 A	50 ppm	140 mV
DCCS/0.1	100 mΩ	0.02 %	10	5 A	30 ppm	500 mV
DCCS/1	1 Ω	0.02 %	2	1.5 A	10 ppm	1.5 V
DCCS/10	10 Ω	0.02 %	2	0.5 A	10 ppm	5 V
DCCS/100	100 Ω	0.02 %	2	0.15 A	10 ppm	15 V
DCCS/1000	1 kΩ	0.02 %	2	45 mA	10 ppm	45 V

Resistance material: 100 μΩ – 100 mΩ MANGANIN^® sheet, 1 Ω -100 kΩ ZERANIN^® wire
Calibration temperature: 23 °C ± 3 K (< 0.5 W load)
Surface temperature: max. 85 °C
Thermal resistance: 11 K/W
Test voltage: 2900 V DC (resistance element-housing)
Nominal insulation voltage: 650 V DC (insulated mounting required)
Insulation resistance: > 100 MΩ
Specifications: according IEC 60477
Size: 1.5 x 3.8 x 1.6 in (2.3 in with terminals) Weight: 0.55 lbs

Manganin^® and Zeranin^® are registered trademarks of Isabellenhütte Heusler GmbH & Co.

DATASHEET AND MANUAL

Data Sheet: This document explains the features, options, Specifications and option models for this item.

ACCESSORIES

ISO-17025 ACCREDITED CALIBRATION WITH TEST DATA	TL-600 PERFORMANCE SPADE LUG CABLES	KK-100 GENERAL PURPOSE SPADE LUG CABLES
TL-500 ULTRA HIGH PERFORMANCE BANANA CABLES	Z540 CALIBRATION WITH NIST TRACEABLE CERT & TEST DATA