Clamp Power Meter KEW 2062

Name: Clamp Power Meter KEW 2062
Brand: Kyoritsu
Rating: 4.9 (50 reviews)

Thương hiệu : Kyoritsu

Liên hệ báo giá Hotline/ Zalo: 0911.559.559 Hotline/ Zalo: 0911.559.559

Cam kết và Chính sách của TECHNO

Cam kết 100% Hàng chính hãng
Chất lượng cao, đáp ứng đa dạng nhu cầu
Tư vấn kỹ thuật toàn diện và chuyên sâu
Chính sách bảo hành và hỗ trợ nhanh chóng

Thông số kỹ thuật

Mô tả sản phẩm

Thông tin NSX

Catalogue

CATALOG

INSTRUCTION MANUAL

A tear drop shape jaw with the conductor size 55 mm: Convenient to use at a small-sized office and factory

・Current up to 1000A rms
・Voltage up to 1000V rms
・Harmonics up to 30th
・Various measurement functions: current, voltage, power, harmonics
and phase detection
・LCD can display simultaneously the values of voltage and frequency
or power and power factor
・Each degree of harmonics can be shown on the LCD of the tester

TRUE RMS φ55 Backlight

１．Various measurement functions

〇 Measurements of current, voltage, power, harmonics and phase detection are possible.
〇 True RMS: Indicates a correct value at the distorted waveform.
〇 Functions of PEAK, MAX, MIN, AVG are available. Easy to check the temporal change in the power source.
〇 LCD can display simultaneously the values of voltage and frequency or power and power factor.

2．Power measurement

Power measurement on any wiring system is possible.

KEW 2060BT can perform Single-phase 2-Wire / Single-phase 3-Wire and balance and unbalance measurements of Three-phase 3-Wire / Three-phase 4 Wire. The double display can simultaneously show many parameters like W & PF, W & deg, W & VA, W & Var, V & A, etc.

Various parameters such as active/reactive/apparent power,
power factor, phase differences (1P2W only) which are required for the power measurement can be measured.

Total 3-phase power can be measured in simple steps.

By setting the CT and VT ratio and measuring the secondary side of the transformation, the primary side value can be obtained.

3．Harmonics measurement

Harmonics of the voltage and current, which cause various failures at the field, can be measured. It is possible to measure and show each voltage and current harmonics up to 30th.
Total harmonics distortion factor is in two types of THD-R and THD-F. Each degree of harmonics can be shown on the LCD of the tester. Both the current value (or voltage value) and the content ratio can be displayed on the same screen.

4．Phase detection

ACV
Wiring connections		1P2W, 1P3W, 3P3W, 3P4W
Measurements and parameters		Voltage, Current, Frequency, Active power, Reactive power, Apparent power, Power factor(cosθ), Phase angle, Harmonics(THD-R/THD-F), Phase rotation

	Range	1000V
	Accuracy	±0.7%rdg±3dgt (40.0 – 70.0Hz) ±3.0%rdg±5dgt (70.1 – 1kHz)
	Crest factor	1.7 or less
ACA

	Range	40.00/400.0/1000A (3 range auto)
	Accuracy	±1.0％rdg±3dgt (40.0 – 70.0Hz) ±2.0％rdg±5dgt (70.1 – 1kHz)
	Crest factor	3 or less on 40.00A/400.0A range, 3 or less 1500A peak on 1000A range
Frequency

	Display Range	40.0 – 999.9Hz
	Accuracy	±0.3％rdg±3dgt
Active power

	Range	40.00/400.0/1000kW
	Accuracy	±1.7%rdg±5dgt (PF1, sine wave, 45 – 65Hz)
Apparent power

	Range	40.00/400.0/1000kVA
	Accuracy	±1dgt against each calculated value Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt
Reactive power

	Range	40.00/400.0/1000kVar
	Accuracy	±1dgt against each calculated value Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt
Power factor

	Display Range	-1.000 – 0.000 – +1.000
	Accuracy	±1dgt against each calculated value Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt
Phase angle (1P2W only)

	Display Range	-180.0 – 0.0 – +179.9
	Accuracy	±3.0°
Harmonics RMS(Content rate)

	Analysis order	1st – 30th order
	Accuracy	±5.0％rdg ± 10dgt (1 – 10th) ±10％rdg ± 10dgt (11 – 20th) ±20％rdg ± 10dgt (21 – 30th)
Total harmonics THD-R/THD-F

	Display Range	0.0% – 100.0%
	Accuracy	±1dgt against the calculated results of each measured value
Phase rotation		ACV 80 – 1100V (45 – 65Hz)
Other functions		MAX/MIN/AVG/PEAK, Data hold, Back light, Auto power off
General

	Power source	LR6(AAA)(1.5V) ×2
	Continuous measuring time	Approx. 58 hours
	Conductor size	φ55mm max.
	Dimensions / Weight	247(L) × 105(W) × 49(D) mm / Approx.490g(including batteries)
	Applicable Standards	IEC 61010-1, IEC 61010-2-032, IEC 61326-1,-2-2 (EMC), IEC 60529 (IP40) CAT IV 300V / CAT lll 600V / CAT ll 1000V Pollution degree 2
	Accessories	7290 (Voltage test lead set) 9198 (Carrying case) LR6(AAA)×2, Instruction Manual