Vietnamese
Overview
A total of seven types of distributing valves are available: MJN, M, MX, MJNO, MO, MXO, and MG. Distributing valves comprise a inlet element, end element, middle element (minimum 3 – maximum 8), and a gasket.
Features
• This is a progress operation system.
• Piping is done by single line.
• Indicator alarms can be attached.
• As operating parts are built-in, these valves are sturdy and resistant to water and dust.
• You can select from 2 up to a maximum 16 discharging ports for each distributing valve assembly.
• Various spool sizes are available corresponding to the required amounts of grease or oil at lubrication points, which enables lubrication by appropriate quantities.
Specifications
| Size | Distributing valve type |
Number of middle elements |
Discharging port diameter |
Discharge quantity per discharging port (cm3/stroke) |
Supply port diameter |
Discharging port diameter |
Built-in check valve |
Application | Max. operating pressure （MPa） |
|
| Small type | MJN | Min. 3 to max. 8 |
Min. 2 to max. 16 |
0.082 to 0.492 | Rc1/8 | Rc1/8 | Yes | Grease and oil for intermittent lubrication |
14 (grease) |
10 (oil) |
| Medium-size type | M | 0.164 to 1.148 | Rc1/4 | Rc1/8 | 21 (grease) |
10 (oil) |
||||
| Large type | MX | 0.410 to 4.920 | Rc3/8 | Rc1/4 | ||||||
| Small type | MJNO | Min. 3 to max. 8 |
Min. 2 to max. 16 |
0.082 to 0.492 | Rc1/8 | Rc1/8 | No | Oil for circulating lubrication |
10 (oil) | |
| Medium-size type | MO | 0.164 to 1.148 | Rc1/4 | Rc1/8 | ||||||
| Large type | MXO | 0.410 to 4.920 | Rc3/8 | Rc1/4 | ||||||
| Extra-large type | MG | 2.460 to 19.680 | Rc1/2 | Rc3/8 | ||||||
*The grease used is NLGI consistency #0 to #1 for centralized lubrication.
Explanation of Model Symbols
