CBM-910Ⅱ
Back to products
SDI
Click to enlarge
ViBRA

LAS-05D-SD

Brand

ViBRA
Sub Categories

Mass, Force & Hardness Test and Measurements
Application

Vibra peripherals & accessories
Category:
Features

Features

  • It is sometimes happen that weighing objects, especially non-conductive material like plastic, generate static electricity. It could influence the weighing results and cause large measurement error.
  • Ionizer is commonly used to neutralize static electricity of weighing objects and in the environment.

Specification

Specification

Models LAS-05D-SD
Ionizing type DC corona discharge (±both polarity)
Effective ionizing area 50 to 700mm
Ionizing performance Approx. 8 seconds
Ion balance control method TAIBS method
Life time of ionization 50,000 operation hours
Life time of needle 6,000 operation hours
Amout of O3 generation less than 0.04 PPM
Power consumption 2.8 W
Phisical dimention 180×84×114mm (LWH)
Weight 180g
Operation temperature, humidity 0 to 40°C 35 to 65% RH

 

Related products

CardVibro Air2 (VM-2012/VM-2012C)

Seismic Monitoring System (SW-72R)

DC-Series (2-Axis Changeover System)

TC-Series (3-Axis Changeover Systems)

M-Series (Low Acoustic Noise and Compact Range)

VHS-Series (Wide Frequency Band Type)

K-Series (High Excitation Force Water Cooled Range)

Seismic Monitoring System SW-74