Vietnamese
GENERAL
- 0.05% measurement accuracy
- 5 test frequencies 100 Hz to 100 kHz
- 5 impedance parameters
- Built-in test fixture
GENRAD 1692 BENCHTOP LCR METER
| Brand |
IET Labs, Inc |
|---|---|
| Sub Categories |
Electric & Electronic Test and Measurements |
| Application |
LCR Meter |
GENERAL
DESCRIPTION
DESCRIPTION
Why Buy
- Built-in fixture for testing axial and radial components
- A general purpose meter for component screening
- (Replacement for classic GenRad 1692 digibridge with years of proven service
Description
The GenRad 1692 LCR Meter is an RLC passive component tester that gives you the most cost effective alternative to high-priced LCR testers. It’s designed for the demanding applications in production testing, incoming inspection, component design and evaluation. It provides superior testing performance and capability at the lowest cost.
The GenRad 1692 LCR Meter is a sophisticated, microprocessor-controlled tester that brings new levels of flexibility, simplicity and accuracy to RLC measurement. It’s testing automation at its best with a range of programmable test frequencies and test voltages, as well as automatic limit comparison, automatic parameter selection, remote programmability, automatic binning and automatic zeroing. The display facilitates visual acquisition of test data and eliminates costly guesswork and errors. The 1692 LCR Meter provides a powerful combination of features designed to maximize productivity in production testing applications.
GenRad 1692 LCR Meter Features
- 0.05% Accuracy for RLC measurements; 0.0003 for D and Q measurements.
- Five selectable test frequencies: 100 Hz, 120 Hz, 1 kHz, 10 kHz and 100 kHz for greater versatility in component testing
- Choice of two commonly specified AC test voltages.
- Three keyboard-selectable test speeds; 2,4 or 8 measurements per second complements automatic handling equipment to maximize throughput.
- A choice of two measurement modes; Triggered and Continuous with averaging available in each ensures measurement flexibility.
- Wide choice of measurement parameters allow you to work with familiar units.
- A full, five-digit LED display for RLC measurements and a four-digit readout for D and Q testing, simultaneously display both test results for each measurement, automatically
- Guarded Kelvin measurement techniques protect measurement integrity.
- Automatic limit comparison and binning ensure fast, mistake-proof sorting of components.
- Optional IEEE-488.2 Interface enable remote programming and allow the addition of a component handler to optimize throughput.
Should the 1692 Benchtop LCR Meter not meet your requirements, see our full line of LCR Meters.
SPECIFICATION
SPECIFICATION
GenRad 1692 LCR Meter Basic Specifications
(See datasheet for full specifications)
Accuracy: Basic RLC ±0.05%. Basic DQ ±0.0003
Measurement Parameters: R/Q, L/Q, C/R, C/D (series or parallel)
Test Frequencies: 100Hz, 120Hz, 1 kHz, 10 kHz, 100 kHz
Test Frequency Accuracy ±0.01%.
Applied Voltage: 0.3V to 1.0VRMS maximum
Measurement Speed: 2, 4 or 8 measurements/second for Slow, Medium or Fast.
Measurement Mode: Continuous, Triggered (single, or 1 to 10 measurements averaged).
Display Format: Dual Display featuring 5 full digit LED for RLC and 4 full digit LED for DQ Bin Number,Value Automatically positioned decimal points and minus signs where appropriate. Individual LED indicators for parameters, units, and measurement conditions. GO/NO GO lights
Bias: Internal 2.0VDC External up to 60VDC
Automatic Functions: Auto ranging with manual hold, Auto parameter (RLC) with manual selection
Binning: Eight pass bins for RLC Two fail bins, RLC and DQ
Interfaces: IEEE-488 Interface option
Ranges:
| Parameter | ||
| RLC | DQ | |
| R/Q | 0.00001Ω to 99999MΩ | 0.0001 to 9999 |
| L/Q | 0.00001mH to 99999H | 0.0001 to 9999 |
| C/D | 0.00001pF to 99999mF | 0.0001 to 9999 |
| C/R | 0.00001nF to 99999mF | 0.0001Ω to 9999kΩ |
Basic DQ ±0.0003
Zeroing: Open and short circuit compensation.
General Features: • Charged Capacitor Protection (1 Joule) • Keyboard Lock• Store Test Conditions
Dimensions: (w x h x d): 14.8 x 4.4 x 13.5in (375 x 112 x 343mm)
Weight: 10 lbs. (4.5kg) net, 15 lbs. (6.8kg) shipping.
Accessories Supplied: • Power Cable • Axial Lead Adapters • Test Fixture (Built-in) • Instruction Manual
DATASHEET AND MANUAL
DATASHEET AND MANUAL
- Data Sheet: This document explains the features, options, Specifications and option models for this item.
- Product Manual: Specifications and option models for this item. This document contains the technical product manual and guidelines.
APPLICATION NOTES AND SOFTWARE
APPLICATION NOTES AND SOFTWARE
- Application Notes: Application notes and technical resources for this instrument.
ACCESSORIES
