FGS-50E

Brand

SHIMPO

Sub Categories

Mass, Force & Hardness Test and Measurements

Application

Motorized Test Stands for Force Gauges

Features

Four operational modes are available
Four operational modes: Manual, Jog, 1-Cycle, and Repeated Reciprocation.

Two travel speed ranges
Two travel speed ranges are available to be selected from: low-speed type (6 – 108 mm/min) and high-speed type (20 – 600 mm/min).

Universal voltage
Accepts a wide range of input voltage (AC 100 – 240 V).

Front cover for safety

Easy operation
Everything from the display (LCD) to various settings has been made easier to see and to operate.

Specifications

Model	FGS-50E
Version	FGS-50E-L (low-speed specification)	FGS-50E-H (High-speed specification)
Measured load	500N(50kg)
Load capacity	500N(50kg)
Feed rate	6-180mm/min	20-600mm/min
Speed setting	Set the speed on the control panel.
Stroke	400mm
Representation Department	LCD 3 digits, displays travel speed and operating mode
Movement speed	6-180mm/min	20-600mm/min
Mode of operation	Manual (MAU), Inching (JOG), Single Cycle (SIG), Reciprocating Repetition (CON)
Input	Stop at overload signal of overload input FGPX (FGP)
Measurement table	150×93mm
Operating temperature range	0-45°C (non-condensing)
Power supply	AC100V-AC240V±10%
Quality	Approx. 20kg
External dimensions	220×680×358mm
Accessory	・ Connection cable x 1 ・ Power cable x 1 ・ Cable clip x 1 ・ Socket bolt (M4×12 force gauge mounting x 4, M6×12 x 2 for jig mounting) ・ Hex bar spanner M8 x 1, M4 x 1 ・ Instruction manual 1 book ・1 warranty card
Compatible models (compatible digital force gauges)	FGP series (0.2-50), FGPX (0.2-50)

Brand	SHIMPO
Sub Categories	Mass, Force & Hardness Test and Measurements
Application	Motorized Test Stands for Force Gauges

Category: Test and Measurements

Four operational modes are available
Four operational modes: Manual, Jog, 1-Cycle, and Repeated Reciprocation.

Two travel speed ranges
Two travel speed ranges are available to be selected from: low-speed type (6 – 108 mm/min) and high-speed type (20 – 600 mm/min).

Universal voltage
Accepts a wide range of input voltage (AC 100 – 240 V).

Front cover for safety

Easy operation
Everything from the display (LCD) to various settings has been made easier to see and to operate.

Model	FGS-50E
Version	FGS-50E-L (low-speed specification)	FGS-50E-H (High-speed specification)
Measured load	500N(50kg)
Load capacity	500N(50kg)
Feed rate	6-180mm/min	20-600mm/min
Speed setting	Set the speed on the control panel.
Stroke	400mm
Representation Department	LCD 3 digits, displays travel speed and operating mode
Movement speed	6-180mm/min	20-600mm/min
Mode of operation	Manual (MAU), Inching (JOG), Single Cycle (SIG), Reciprocating Repetition (CON)
Input	Stop at overload signal of overload input FGPX (FGP)
Measurement table	150×93mm
Operating temperature range	0-45°C (non-condensing)
Power supply	AC100V-AC240V±10%
Quality	Approx. 20kg
External dimensions	220×680×358mm
Accessory	・ Connection cable x 1 ・ Power cable x 1 ・ Cable clip x 1 ・ Socket bolt (M4×12 force gauge mounting x 4, M6×12 x 2 for jig mounting) ・ Hex bar spanner M8 x 1, M4 x 1 ・ Instruction manual 1 book ・1 warranty card
Compatible models (compatible digital force gauges)	FGP series (0.2-50), FGPX (0.2-50)

Dimensional Drawing

Download

FGS-50E

Features

Specifications

Dimensional Drawing

Download

Related products

Sign in