The CB Series is an incremental encoder which generates certain number of pulses for every complete revolution. Our CB Series is fully compatible with our counters. It is available in different Pulse per Revolution (PPR) ranging from 100 PPR to 2500 PPR. It also has a universal mounting hole configuration which makes a worry-free replacement of any other encoders.
| ELECTRICAL | ||||
| Model | CB-□HC | CB-□LC | CB-□LV | CB-□LD |
| Power Supply (Ripple 3% max.) |
DC12 – 24V ±10% | DC5 – 12V ±10% | DC5V ±10% | |
| Current Consumption | 50 mA max. | |||
| Output | Open Collector | Voltage | Line Driver | |
| Output Signal | 90°Quadrature + Zero Marking | |||
| Output Phase | A,B,Z | A,B,Z, , , |
||
| Output Capacity | Sink Current: 35mA max. Residual Voltage: 0.5V max. |
Sink Current 20 mA max. |
±20mA | |
| Max. Applied Voltage | 30V max. | |||
| Output Voltage | – | H:Supply Voltage -1 V min. L:0.5 V max. |
H:2.5 V min. L:0.5 V max. |
|
| Max. Freq. Response | 100 kHz | |||
| Signal Rise/Fall Time (Pull-up resistor 2.2kΩ, 1m Cable) |
1μs max. | 0.1μs max. | ||
| Insulation Resistance | 20MΩ min.(DC100V Megger) | |||
| Output Impedance (Voltage Output only) |
– | 2.2kΩ | – | |
| Cable Length | 500_files/0.gif){kind=small} mm |
|||
| Outside Diameter | Փ5.1mm | |||
| MECHANICAL | ||
| Max. Speed of Shaft | 6000rpm | |
| Moment of Inertia | 6 x 10ˉ⁷ kg叮² max | |
| Starting Torque | 1.0 x 10ˉ³ N叮 max | |
| Angular Acceleration | 10⁵rad/s² | |
| Max.Shaft Loading |
Radial | 25N max. |
| Axial | 15N max. | |
| Weight | Approx. 120g (with 0.5m Cable) | |
| ENVIRONMENTAL | |
| Operating Temperature | -10 – +70°C (Non-Freezing) |
| Storage Temperature | -25 – +80°C (Non-Freezing) |
| Operation Humidity | 35 – 95% (Non-Condensing) |
| Vibration Resistance | 10 – 55Hz, Width (P-P) 1.5mm (2hours each in X,Y,Z Direction) |
| Shock Resistance | 6ms, 980 m/s² (3times each in X,Y,Z Direction) |
| Protection | Equivalent to IP50 |
