DESCRIPTION

Multi-Channel Measurement up to 32 Channels!
Simple and Excellent Operation!!

Features

Multi-channel Measurement

Direct sensor inputs up to 32 channels (16 slots).
16 digital inputs for measuring various timing signals.

Unique & Easy “Pen-Recorder” Mode

Easy operation like a pen recorder by the touch panel and virtual amp controls.
High-speed and high-quality printout at max 50mm/sec.

Large 12.1″ Display

12.1″ TFT color LCD display for better visibility of measured data.

Long-term Continuous Recording on HDD Built-in 40GB HDD Provides 60 days Recording

At 10ms sampling on 32 channels

User selectable measurement modes

Users can easily select from five (5) measurement modes_Pen Recorder mode for real time strip chart recording, HD Recorder mode for long term recording of data to a HDD, X-Y Recorder mode for displaying/recording X-Y correlation of two signals, Multi Recorder mode captures transients while recording steady-state signals, and a Memory Recorder mode for recording fast events.

Simple Operation

A “Virtual” Amplifier Control Panel with “Auto Function” automatic adjustment mode combined with our proven reliable touch panel guarantee accurate data recording and simple operation.

Upright Type (easy setup on a bench top or rack)

Parts configuration for measurement on a bench top or rack_control, display and printer units on the front; amplifiers and interfaces on the back.

High-speed & High-quality Printing

Real time selectable chart speeds from 50mm/sec to 1mm/min (resolution: 20 dots/mm).

32 channels Analog & 16 channels Digital recording

Input up to 32 channels of analog data via isolated, dual channel, plug-in amplifier modules for a wide variety of signals and sensors.
Also, 16 digital input channels measure diverse signal timing and contact status.

Outstanding Search Function

Max/Min, time and other search functions are available for finding required data points fast and easily after long term measurement.

Standard LAN and USB I/F

LAN (100BASE-T) for data communication and USB for connecting to external storage devices are equipped as standard interfaces.

SPECIFICATION

type		RA2800A
Display		12.1″ TFT color LCD (1024×768) with touch panel
Channel		32 channels(16 s lots) + 16 channel digital inputs (built-in on mainframe)
Memory	Capacity	1MW/ch (32MW when using 1 channel)
Memory	Division	1, 2, 4, 8, 16, 32, 64, 128 divisions
Sampling speed		MAX 2µs(500kS/s)~
Printer	Printing method	Thermal head printer on thermal paper
	Width of paper	219.5mm
	Chart Speed	50mm/s to 1mm/min
	Effective printing range	1 division (200mm/FS) to 16 divisions (10mm/FS) or arbitrary divisions and range settings
Storage device		Builtin HDD 40GB (including system domain 5GB) External: USB memory, MO through USB standard I/F
Interface		LAN (100BASE-T) —control with communication command: Standard USB —external storage device connection: Standard RS-232C —control by communication command or UPS shut-down: Option
Measuring mode		Pen Recorder —Records real time signal directly on chart paper HD Recorder —Records input signal on built-in HDD directly Measuring mode Memory Recorder —Records high speed events initiated by set trigger Multi Recorder —Combined recording modes of Memory, HDD and/or Pen Recording X-Y Recorder —Displays and records X-Y gragh by arbitrary 1ch f or X and up to 3ch f or Y axis
Dimensions		Approx. 400 (W) x 270 (H) x 380 (D) mm excluding projections

**Specifications are subject to change without prior notice.

CONFIGURATION & ACCESSORIES

Models

Main Unit

Item	Model	Specification
OMNIACEⅢ	RA2800A	Mainframe only

Input Amplifiers

Item	Model	Specification
2ch High Res DC Amp	AP11-101	Input: ±100mV to ±500V, A/D: 16-bit
2ch FFT Amp	AP11-102	Anti-aliasing filter: 72dB/OCT, w/ power supply for sensor
2ch High-speed DC Amp	AP11-103	Input: ±100mV to ±500V, A/D: 12-bit
2ch AC Strain Amp *1	AP11-104A	Frequency characteristics: 2kHz, Bridge power: 5kHz
Event Amp	AP11-105	Input: 8 logic (voltage/contact)
2ch TC/DC Amp	AP11-106A	Input: R, T, J, K, W (±100mV to ±50V), A/D: 15-bit
TC/DC Amp	AP11-107	Input: R, T, J, K (±100mV to ±50V), A/D: 14-bit
F/V Converter	AP11-108	Input: 1Hz to 10kHz
2ch Vibration/RMS Amp	AP11-109	Input: ±100mV to ±500V, w/ power supply for sensor
2ch DC Strain Amp	AP11-110	Input: 800µe to 20kµe(BV=5V), 2kµe to 50kµe(BV=2V)
2ch Zero Suppression Amp	AP11-111	Input: ±100mV to ±500V, A/D: 16-bit

*1: Optional AC Bridge Power Unit (RA23-143) is required.

Options

Item	Model	Specification
Remote Unit	RA23-144	Use external signals to start/stop recording and paper feed
RS-232C Unit	RA23-142	Control by communication commands or UPS shut-down
AC Bridge Power Unit	RA23-143	Bridge power unit for 2ch AC Strain Amp (AP11-104A)