|Setting Temperature Range(℃)||25～45|
|Use Area Temperature(℃)||-5～55|
|Use Area Humidity(%RH)||10～85 (No condensation)|
|Surface finish||SUS-HL Finish|
|Rated Voltage(V)||Single-phase AC200～240|
|Consumption Current: Rated(A)||6.1/5.9|
|Consumption Current: MAX(A)||6.8/6.6|
|Consumption wattage: Rated(W)||1000|
|Consumption wattage: MAX(W)||1100|
|Vibration Resistance||Equivalent to JIS Z 0200 Level1|
|Dust prevention / dust proof protection class||IPX4 (ENC-SUS unit only), Equivalent to IP54 (internal circulation route)|
|Refrigerant / Fill ration(g)||R1234yf 800g|
|Noise (dB (A))||Approx. 80|
|External Output||Alarm output (No-voltage/normal open: resistive load 250V 2A), Can be switched to no-voltage/normal close by setting|
*Cooling Capacity : Rated capacity value when ambient temperat ure is 35°C and ambient humidity is 40%RH , power source & voltage : 200V. (Measuring specification :JIS B 8615-1 the inside of a air enthalpy test method)
*Use area temperature / humidity : Use area temperature / humi dity is not meant to satisfy all conditions in temperature and humidity.
*Rating Value : 35°C ambient temperature, ambient humidity RH 40%, power source & voltage : 200V.
*Maximum Value : The ambient temperature at MAX value has spec ification separately.
*Use the product keeping the use power supply and voltage; wit hin ±10% of rated power supply and rated voltage.
*Consumption current and wattage are values during cooling ope ration.
*Dust prevention / dust proof protection class : Excluding dra in pipe section
*Reading an instruction manual well certainly before use and p lease use it right.