|Setting Temperature Range(℃)||25～45|
|Use Area Temperature(℃)||20～55|
|Use Area Humidity(%RH)||10～85 (No condensation)|
|Coating Color||Munsell 5Y 7/1 Equivalent color of light beige|
|Rated Voltage(V)||Three-phase AC380～415/AC400～460|
|Consumption Current: Rated(A)||1.7/1.9|
|Consumption Current: MAX(A)||2.2/2.5|
|Consumption wattage: Rated(W)||1000/1200|
|Consumption wattage: MAX(W)||1350/1700|
|Noise Resistance||LEVEL4 by Fast Transient / Burst Immunity Test|
|Vibration Resistance||Equivalent to JIS Z 0200 Level1|
|Dust prevention / dust proof protection class||Equivalent to IP54 (internal circulation route)|
|Refrigerant / Fill ration(g)||R134a 300g|
|Noise (dB (A))||Approx. 65/67|
|External Output||Alarm output (No-voltage/normal open: resistive load 250V 2A)|
|Display||Internal temperature/Error display LED/RUN LED|
Cooling capacity : Rated capacity value when external temperature is 35°C, internal temperature is 35°C - 40％. (measurement conditions: JIS-C-9612 air enthalpy method)）
MAX value: Value at the maximum ambient temperature allowed and an operating ambient humidity of 40%RH.
Use the product keeping the use power supply and voltage; within ±10% of rated power supply and rated voltage.
Reading an instruction manual well certainly before use and please use it right.
|Mounting bolt for main unit||6 (M8×L25)|
|Insulation lock ties||1|
Replacement parts list
|Condenser side Fan||Circulating fan for ENC-G2240L|
|Evaporator side Fan||Outside air fan for ENC-G2240L|
|Filter||ENC-F-43 (2 pieces)|
|Control PCB||Substrate for ENC-G2240L|
Note: Check with our sales representative as the delivery lead time varies depending on the inventory status.
*Note that the model, specifications and other details described are subject to change without notice.
Diagram of Panel Cutout
[Standard panel cut （Left）]
*Figure seen from control board outside.
*Please keep screw pace on the occasion of processing.
*Standard panel cut will not be changed even if a model change is carried out (some exceptions apply), but the minimum panel cut dimensions are subject to change without notice.
[Half-embedded Panel Cut (Right)]