Contact Sensor Type Vibration Monitoring System (VM-9301 series)

Application

Measuring System

Brand

IMV

Sub Categories

Reliability & Durability Test and Measurements

Model

VP-3144C/D

VP-3354 A
（Horizontal only）

VP-3364 A
（Vertical only）

VP-3134AEX

VP-3213 AC/AD

VP-3133 HEX/VEX

Sensitivity

10 mV/(mm/s)

17.5 mV/(mm/s)

Natural frequency

14 Hz

4.5 Hz

Operating temperature range

-20 to ＋80℃

-20 to ＋70℃

Structure

Drip-proof (Equivalent to IP32)

Water-proof (Equivalent to IP66)

Flame-proof (EX d ⅡBT4Gb)

Drip-proof (Equivalent to IP32)

Flame-proof (EX d ⅡBT4Gb)

Outward appearance

VP-3144 C/D

Type C

VP-3213 AC/AD

Type AC

Notes

High sensitivity /medium frequency

Medium frequency /2-directional

Medium frequency /3-directional

Medium frequency

Low frequency /horizontal only

Low frequency /
HEX (horizontal only),
VEX (vertical only)

Model

VP-A52IW

HS-100I

Sensitivity

5 mV/(m/s²)

50 mV/G

Natural frequency

35 kHz

24 kHz

Operating temperature range

-30 to ＋110℃

-20 to ＋80℃

Structure

Insulative and water proof

Safe and explosion proof
(Ex iaⅡC T4 Ga)

Outward appearance

Notes

Insulated

Channel

Type 1 channel

170

300

132

148

162

Type 3 channel

210

149

300

160

132

180

143

100

195

Type 6 channel

300

149

300

250

132

270

143

100

285

Type 9 channel

390

149

300

340

132

360

143

100

375

Type 12 channel

480

149

300

430

132

450

143

100

465

Standard

Type		VM-9301 series	VM-9301A series
Pickup		Electrodynamic velocity pickup	Piezoelectric accelerometer
Amplifier unit type		Type 1 line ：VA-9301(1-I) Select velocity or displacement Type 2 line ：VA-9301(2-I) Simaltaneous measurement of velocity and displacement	Type 1 line ：VA-9301A(1-I) Select acceleration, velocity or displacement Type 2 line ：VA-9301A(2-I) Simaltaneous measurement of any two of acceleration, velocity or displacement
Frequency range		Low： 5 to 500Hz (-11 to +6%) Medium：10 to 500Hz (-11 to +6%) Filter selectable （pass band）High-pass filter ：5, 10, 15, 20, 50, 100Hz Low-pass filter ：20, 50, 100, 200, 500Hz	5 to 10kHz (-30 to +6%) Filter selectable （pass band）High-pass filter ：5, 10, 20, 50, 100Hz Low-pass filter ：100, 200, 500, 1k, 5k, 10kHz (High-pass filter : 20Hz- in case of displacement or velocity Low-pass filter : -500Hz in case of displacement, -1kHz in case of velocity)
Measurement range	Displacement	50, 100, 150, 200, 300, 500, 999 (1,000) μmP-P	100, 150, 200, 300, 500, 999 (1,000) μmP-P
	Velocity	10, 15, 20, 30, 50 mm/s	10, 15, 20, 30, 50 mm/s
	Acceleration	―	10, 15, 20, 30, 50, 100, 150, 200, 300, 500 m/s²
Equipment failure	Indication lamp	Orange LED located on the upper part of amplifier front panel [FAT] Secondary power is lit at ubnormal condition.
	Alarm contact	1a contact (open at normal condition) operate under fuse melting, power switch shut off and primary / secondary power failure
	Alarm reset	Select from automatic or manual recovery
Pickup cable break alarm	Indication lamp	Green LED located on the upper part of amplifier front panel [PU] Lights-out when wire is broken (lights-on at normal condition) (When pickup connected with charge amplifier is used, this function is not valid.)
	Alarm contact	Standard：1a contact *available 1b or 1c (open at normal condition, closed when wire is broken) operate when pickup cable is broken.
	Alarm reset	Select from automatic or manual recovery
Alarm	Alarm step	Type 1 line：upper limit 2 steps Alarm (ALM) / Trip (TRP) Type 2 line：upper limit 1 step Alarm1 (ALM1,1lline), Alarm2（ALM2, 2line）
	Delay timer	Select from 0 to 15 sec. by the slide switch inside of the amplifier unit (0 sec. if not specified.)
	Setting extent	5.0 to 99.9% (can be set at 0.1% intervals) (When alarm function is not used 99.9% is set. Indication lamp and contact is on at over fullscale value)
	Indication lamp	Type 1 line：Orange LED [ALM], red LED [TRP] Type 2 line：Orange LED [ALM1], red LED [ALM2]
	Alarm Contact	Select from “ALM / ALM1 circuit：2a contact TRP / ALM2 circuit 2a contact” or “ALM / ALM1 circuit：1b1a contact TRP / ALM2 circuit 1a1b contact”
	Contact capacity	AC110 V 2 A (DSP Relay made by Panasonic) DC110 V 0.2 A
	Alarm reset	Select from automatic (Hysteresis 3%) or manual recovery
Rectification level output	DC output 1	Select from DC4-20mA (insulation output), Loading 500Ω or less or DC1-5 V (insulation output), Loading 100kΩ or more
	DC output 2	Select from DC4-20mA (insulation output), Loading 500Ω or less or DC1-5 V (insulation output), Loading 100kΩ or more
Waveform output	Pickup waveform output	AC±10mV /(mm/s) or AC±17.5mV /(mm/s), Loading 100kΩ or more (Depending on specifications of pickup)	AC±5mV/(m/s²), Loading 100kΩ or more (Depending on specifications of pickup)
	Waveform output	AC±5V(at the full-scale), Loading 100kΩ or more
Panel meter		Red LED three-digit indication, [9.9.9] is displayed at over 120% of full-scale
Operating temperature / humidity range		0 to 50 °C, 20 to 95%RH, wet bulb temperature is 35°C (non-condensing)
Power supply		Available range AC85 to 264V, 47 to 66Hz
Power consumption		20VA or less (1CH), 30VA or less (3CH), 45VA or less (6CH), 60VA or less (9CH), 75VA or less (12CH) At AC100V (Depends on the number of amplifier or power supply)
Painting color		Munsell 5Y7/1, half matted
Mass		Approx. 2.0kg (1CH), approx. 3.9kg (3CH), approx. 5.9kg (6CH), approx. 8.2kg (9CH), approx. 10.2kg (12CH)

Application	Measuring System
Brand	IMV
Sub Categories	Reliability & Durability Test and Measurements

Category: Test and Measurements

Description
Specification

Description

Permanent vibration monitoring for systems such as motor, pump and blower.

Monitoring system suitable for multi-channel measurement. Frequency range, measurement range or output signal can be customized.

Features

Compatible with conventional systems

A wide range of compatible sensors

Selectable from electrodynamic velocity sensor or piezoelectric sensor.

Electrodynamic velocity sensors

Specialized in medium frequency (up to 1,000 Hz) vibration detection. Suitable to velocity monitoring.

Model	VP-3144C/D	VP-3354 A （Horizontal only）	VP-3364 A （Vertical only）	VP-3134AEX	VP-3213 AC/AD	VP-3133 HEX/VEX
Sensitivity	10 mV/(mm/s)	10 mV/(mm/s)		10 mV/(mm/s)	17.5 mV/(mm/s)	17.5 mV/(mm/s)
Natural frequency	14 Hz	14 Hz		14 Hz	4.5 Hz	4.5 Hz
Operating temperature range	-20 to ＋80℃	-20 to ＋80℃		-20 to ＋70℃	-20 to ＋70℃	-20 to ＋70℃
Structure	Drip-proof (Equivalent to IP32)	Water-proof (Equivalent to IP66)		Flame-proof (EX d ⅡBT4Gb)	Drip-proof (Equivalent to IP32)	Flame-proof (EX d ⅡBT4Gb)
Outward appearance	Type C				Type AC
Notes	High sensitivity /medium frequency	Medium frequency /2-directional	Medium frequency /3-directional	Medium frequency	Low frequency /horizontal only	Low frequency / HEX (horizontal only), VEX (vertical only)

Other sensors for high temperature or waterproof are also available. Please contact .

Piezoelectric sensors

Specialized in high frequency (over 1,000 Hz) vibration detection. Suitable to acceleration monitoring.

Model	VP-A52IW	HS-100I
Sensitivity	5 mV/(m/s²)	50 mV/G
Natural frequency	35 kHz	24 kHz
Operating temperature range	-30 to ＋110℃	-20 to ＋80℃
Structure	Insulative and water proof	Safe and explosion proof (Ex iaⅡC T4 Ga)
Outward appearance
Notes	Insulated	Insulated

Multi-channel

Maximum 12 channel per 1 system is available. Range and function can be set individually per every channel.

Application Example

Cables are laid out between sensors located on a large sized motor of home power generator and a monitoring system housed in a control panel. Monitoring systems can monitor vibration values and output the alarm in an emergency.

Outline Drawing

Unit: mm

		A	B	C	D	E	F	G	H	I
Channel	Type 1 channel	90	170	300	88	132	90	148	162	50
	Type 3 channel	210	149	300	160	132	180	143	100	195
	Type 6 channel	300	149	300	250	132	270	143	100	285
	Type 9 channel	390	149	300	340	132	360	143	100	375
	Type 12 channel	480	149	300	430	132	450	143	100	465

Specification

Type		VM-9301 series	VM-9301A series
Pickup		Electrodynamic velocity pickup	Piezoelectric accelerometer
Amplifier unit type		Type 1 line ：VA-9301(1-I) Select velocity or displacement Type 2 line ：VA-9301(2-I) Simaltaneous measurement of velocity and displacement	Type 1 line ：VA-9301A(1-I) Select acceleration, velocity or displacement Type 2 line ：VA-9301A(2-I) Simaltaneous measurement of any two of acceleration, velocity or displacement
Frequency range		Low： 5 to 500Hz (-11 to +6%) Medium：10 to 500Hz (-11 to +6%) Filter selectable （pass band）High-pass filter ：5, 10, 15, 20, 50, 100Hz Low-pass filter ：20, 50, 100, 200, 500Hz	5 to 10kHz (-30 to +6%) Filter selectable （pass band）High-pass filter ：5, 10, 20, 50, 100Hz Low-pass filter ：100, 200, 500, 1k, 5k, 10kHz (High-pass filter : 20Hz- in case of displacement or velocity Low-pass filter : -500Hz in case of displacement, -1kHz in case of velocity)
Measurement range	Displacement	50, 100, 150, 200, 300, 500, 999 (1,000) μmP-P	100, 150, 200, 300, 500, 999 (1,000) μmP-P
	Velocity	10, 15, 20, 30, 50 mm/s	10, 15, 20, 30, 50 mm/s
	Acceleration	―	10, 15, 20, 30, 50, 100, 150, 200, 300, 500 m/s²
Equipment failure	Indication lamp	Orange LED located on the upper part of amplifier front panel [FAT] Secondary power is lit at ubnormal condition.
	Alarm contact	1a contact (open at normal condition) operate under fuse melting, power switch shut off and primary / secondary power failure
	Alarm reset	Select from automatic or manual recovery
Pickup cable break alarm	Indication lamp	Green LED located on the upper part of amplifier front panel [PU] Lights-out when wire is broken (lights-on at normal condition) (When pickup connected with charge amplifier is used, this function is not valid.)
	Alarm contact	Standard：1a contact *available 1b or 1c (open at normal condition, closed when wire is broken) operate when pickup cable is broken.
	Alarm reset	Select from automatic or manual recovery
Alarm	Alarm step	Type 1 line：upper limit 2 steps Alarm (ALM) / Trip (TRP) Type 2 line：upper limit 1 step Alarm1 (ALM1,1lline), Alarm2（ALM2, 2line）
	Delay timer	Select from 0 to 15 sec. by the slide switch inside of the amplifier unit (0 sec. if not specified.)
	Setting extent	5.0 to 99.9% (can be set at 0.1% intervals) (When alarm function is not used 99.9% is set. Indication lamp and contact is on at over fullscale value)
	Indication lamp	Type 1 line：Orange LED [ALM], red LED [TRP] Type 2 line：Orange LED [ALM1], red LED [ALM2]
	Alarm Contact	Select from “ALM / ALM1 circuit：2a contact TRP / ALM2 circuit 2a contact” or “ALM / ALM1 circuit：1b1a contact TRP / ALM2 circuit 1a1b contact”
	Contact capacity	AC110 V 2 A (DSP Relay made by Panasonic) DC110 V 0.2 A
	Alarm reset	Select from automatic (Hysteresis 3%) or manual recovery
Rectification level output	DC output 1	Select from DC4-20mA (insulation output), Loading 500Ω or less or DC1-5 V (insulation output), Loading 100kΩ or more
	DC output 2	Select from DC4-20mA (insulation output), Loading 500Ω or less or DC1-5 V (insulation output), Loading 100kΩ or more
Waveform output	Pickup waveform output	AC±10mV /(mm/s) or AC±17.5mV /(mm/s), Loading 100kΩ or more (Depending on specifications of pickup)	AC±5mV/(m/s²), Loading 100kΩ or more (Depending on specifications of pickup)
	Waveform output	AC±5V(at the full-scale), Loading 100kΩ or more
Panel meter		Red LED three-digit indication, [9.9.9] is displayed at over 120% of full-scale
Operating temperature / humidity range		0 to 50 °C, 20 to 95%RH, wet bulb temperature is 35°C (non-condensing)
Power supply		Available range AC85 to 264V, 47 to 66Hz
Power consumption		20VA or less (1CH), 30VA or less (3CH), 45VA or less (6CH), 60VA or less (9CH), 75VA or less (12CH) At AC100V (Depends on the number of amplifier or power supply)
Painting color		Munsell 5Y7/1, half matted
Mass		Approx. 2.0kg (1CH), approx. 3.9kg (3CH), approx. 5.9kg (6CH), approx. 8.2kg (9CH), approx. 10.2kg (12CH)