The MD (Totalizer) Series is a 4 digits LED Totalizer in a DIN 72 x 72 panel size (Panel Cut-out size: 68 x 68mm). This is a very simple but functional totalizer. With a count speed of 1kHz maximum, this Add only counter accepts Contact or Non-Contact pulse input. The MD (Totalizer) Series can be powered by AC100/110V or AC200/220V, selectable, and it has an external power supply of DC12V for sensors. It has push button reset on the front panel, remote or electrical reset is also available. Memory is optional.
| Models | Digits | Memory | Weight |
| MD-040 | 4 | – | 500 grams |
| MD-040M | O | 510 grams |
| Models | MD-040 | MD-040M |
| Display | Red LED, 14.22 x 8.13mm (Zero Suppress) | |
| Input Method / Signal |
Contact Input : Relay, Microswitch Non-Contact Input : L : 0 – 1V ; H : +4.5 – 27 |
|
| Count Mode | Additive only | |
| Count Speed | Contact Input : 20 Hz max. / Non-Contact Input : 1000 Hz max. | |
| Pulse Width | Contact Input : 25 msec min. / Non-Contact Input : 0.5 msec min. | |
| Make (Duty) | 1 : 1 | |
| Reset | Front reset (push button) Remote reset (100msec min.) Electric reset (1sec min.) |
Front reset (push button) Remote reset (100msec min.) |
| Memory | None | E²2PROM (10 years. retention, 10,000 times) |
| Power Source for Sensor | DC12V 30mA maximum | |
| Input Impedance | 5kΩ | |
| Power Source | AC100/110V or AC200/220V ±10%, 50/60 Hz | |
| Power Consumption | Approximately 2.5VA | |
| Operating Temperature | -5 – +40°C (non-freezing) | 0 – 40°C (non-freezing) |
| Operating Humidity | 45 – 85%RH (non-condensing) | |
| Hi-pot Test | AC1500V (1 minute) | |
| Dielectric Test | 20MΩ min. (DC500V megger) | |
| Connection | M3 Terminal Screw | |
