The E60 Series is a 60 x 60 panel size electronic preset counter with a Blue STN LCD display with white backlight.
The display is 6 digits dual layer display divided into Main display and Sub-display.The main display has a 10.0 x 5.0 mm figure size showing the count value and the Sub-display shows the preset values.Included in the display are Preset level indicators and Output indicators which can be toggled by a push of a button. The E60 Series is available in 1 or 2 level preset or 1 level + Prewarn type which makes it an ideal counter for general counting or total/batching counting applications.It is AC100-240V powered and has an external power supply of DC12V for sensors.The E60 can count bidirectional (Quadrature), or Add/subtract and upon reaching the preset value/s, the built-in output relays are actuated. Functional modes, Operation modes and Output modes are fully programmable with the menu driven display using the front panel buttons.Functional modes include: Count speed (upto 10kHz), Input Signal (Contact/Open Collector or Voltage), Prescale, Decimal Point Position and Free Write.It has a built-in EEPROM memory to avoid loss of count during sudden power cut.The front panel protection is IP54. Wiring connections is secured with the terminal screws. This makes the E60 Series the most versatile and functional preset counter even for the complicated applications such as packaging (batching), converting (prescale), cut-to-length (preset+prewarn) and many more.
| Models | Digit | Preset | Power source | Input | Count Inhibit Terminal |
Key Protect |
| E60-101 | 6 | 1 Level preset | AC100 – 240V | Contact / Open collector Voltage input (Selectable) |
o | DIP switch |
| E60-101K | x | Terminal | ||||
| E60-201 | 2 Level preset | o | DIP switch | |||
| E60-201K | x | Terminal | ||||
| E60-301 | 1 Level preset + prewarn |
o | DIP switch | |||
| E60-301K | x | Terminal |
| Models | E60 – 101/ E60 – 101K | E60 – 201 / E60 – 201K | E60 – 301 / E60 – 301K |
| Display | Blue STN LCD with white backlight ; Digit Size : 10mm X 5mm | ||
| No. of Digits | 6 | ||
| No.of Digits Setting key | 6 | ||
| Preset Level | 1 | 2 | 1 Level preset + prewarn |
| Setting Range | -99999 – +999999 | ||
| Prewarn Feature | – | – | 0 – 999999 |
| Input Mode | Contact / Open collector Voltage input (Selectable) | ||
| Input Signal | Open Collector (Sink current approx. 11mA ) L : 0 – 4V / Voltage (Input impedance 7KΩ) L : 0 – 4V H : 6 – 30V (Available to DC duplex wire sensor) |
||
| Count Speed | 30Hz, 1kHz, 5kHz, 10kHz (selectable) | ||
| Count Mode | Add/Subtract individual input or 90° quadrature input (selectable) | ||
| Count Range | -99999 – +999999 | ||
| Prescale | 0.001 – 99.999 (0 setting is not available) | ||
| Decimal Point Position | 0.0, 0.00, 0.000, No decimal point | ||
| Write | -99999 – +999999 | ||
| Reset | Front panel reset, Remote reset,Auto-reset | ||
| Remote Reset Time | 2msec or 20msec (selectable) | ||
| Reset Mode | Modes A, B, C, D, E, F, G can be selected. Except for standard output, Mode A only is available for other output modes. |
||
| Memory | E²PROM (10 years, can be used 100000 times) | ||
| Count Inhibit | Available (K-type: Not available) | ||
| Key Protect | Available by DIP SW (K-type: Available by Terminal) | ||
| Output | Relay output (1C ): AC250V 5A/DC30V 5A MAX. Open Collector Output: DC30V 100mA MAX. |
Relay output (1A,1C ) : AC250V 5A / DC30V 5A MAX. Open Collector Output : DC30V 100mA MAX. |
|
| Output Delay | 30Hz : 17ms, 1kHz : 12ms, 5kHz : 12ms, 10kHz : 12ms | ||
| Output Mode | 1 Level Preset: Standard, Equal, Lower Limit, Upper Limit 2 Level Preset: Standard, Equal, Upper-Lower Limit, Upper-Upper Limit 1 Level Preset + Prewarn: Standard, Equal |
||
| Output Time | One shot / HOLD / Others ( selectable ) | ||
| Key Lock | Key operation can be disabled at 4 protection levels (L1, L2, L3, L4) by selecting in Program Mode and shorting key lock terminals. | ||
| Error Display | Available, in case the count range is exceeded with 90°quadrature mode | ||
| Power Supply | AC100 – 240V -15%, +10% | ||
| Sensor Power Source | DC12V 100mA | ||
| Power Consumption | Approx. 7VA for AC240V | ||
| Operating Temperature | -10 – +50°C (non-freezing) 45 – 85%RH (non-condensing) | ||
| Front Panel | IP54 (panel surface) | ||
| Weight | Approx. 200g | ||
