Overview
- Compact and settable on a workbench.
- Test speed setting and control system setting on the touch panel.
- Addition of small-capacity load cells enables tests of a wide range of capacities.
Examples of use
- Tensile/compression tests
- Strength test
- Repeat test
- Product evaluation test
- Bending test at preset displacement
Specifications
| MODEL-1840VCT/2000 | |
| Max. force | 20kN（2000kgf） |
| Force accuracy | Depends on the load cell used. |
| Force measuring amplifier | MODEL-1016C |
| Controller | Built in the tester. |
| Test speed | 0.1～300mm/min |
| Speed changing | Numeric input on the touch panel |
| Stroke | 950mm |
| Distance between test center and column | 175mm |
| Table size | φ300mm, center M20 x 1.5 |
| Drive motor | Servo motor |
| Detector | Rotary encoder |
| Display accuracy | 0.1mm |
| Dimensions | W630×H1685×D610mm |
| Stand mass | Approx. 290kg |
| Amplifier mass | Approx. 5.2kg |
| Power supply | Single phase, 200 VAC, 10 A |
| Standard set | Tester, force measuring amplifier MODEL-1016C, touch panel, load cell 1 piece |
| Options | Additional load cell, jig/fixture, software, column extension, safety cover |
