Features
• Use of a geared motor has resulted in a simpler mechanism. (Outdoor specifications (IP54 or equivalent) have been adopted for the motor.)
• The mechanism of this pump has been simplified, which means that the pump body alone is a light 65 kg or so.
• Adoption of an optional lifter enables the drum can to be easily replaced.
Note: This pump is basically compatible with the H400 type motor driven pump, which already has a proven track record, consult with us when replacing the H400 pump.• A replenisher pump is no longer needed as this is a drum can mounted type lubrication pump.
• Attachment of a follower plate has reduced the amount of residual grease and allows grease to be used more effectively.
• Both single line and dual line systems can be supported as models of this pump are available for both systems.
• The suction performance of high-viscosity grease has been improved by adoption of a piston valve system at the suction port and enhancing cut-off performance.
Specifications
| Max. operating pressure (MPa) | 21 |
| Discharge quantity (cm3/min) | According to specification table (75/90 to 316/380) |
| Power supply (3-phase) | AC 200／220 V (50／60 Hz） AC 400／440 V (50／60 Hz) |
| Drum can used | 200 L drum can |
| Grease used | NLGI No.0 to No2. (Note, however, that the consistency shall be 240 or more at the operating temperature.) |
| Piping system | Single line, dual line |
| Model | LBP08 | LBP10 | LBP20 | LBP40 |
| Discharge quantity(cm3 /min(50/60Hz)) | 75/90 | 100/120 | 158/190 | 316/380 |
| Max. discharge pressure (MPa) | 21 | |||
| Safety valve pressure (MPa) | 25 | |||
| Motor specifications | 0.2 kW, speed reduction ratio 1/59 |
0.2 kW, speed reduction ratio 1/43 |
0.4 kW, speed reduction ratio 1/21 |
|
| Accessories | with follower plate, with low level switch, with drum can access door | |||
| Weight (kg) | Approx. 65 | |||
| Number of lubricating ports | 200 | 300 | 600 | 800 |
Explanation of Model Symbols
