Description

Compression and Side Force Spring Tester is a new and innovative machine that is develop from our spring testing machine over the years.  There will be three load cells above and under the compression and an additional three load cells for the XY axis, using 9 load cells for total compressive load on proprietary software, to obtain displacement force from the top and bottom moment of the spring with reference to the center. All  data can be collected in a single using this Compression and Side Force Spring Tester.

10-SST-20KN

Standard Graph of Compression Load and  Length
Fx-Fy Graph showing the side force based on XY-axis.
Fxy-deg Graph showing the angle obtained from the side force based on XY-axis.
Mz Moment for Z Axis
GxU-GyU Graph showing the displacement from the top of the spring in XY-axis with reference to the center of coil.
GxyU-deg Graph showing the displacement in angle from the top of the spring in XY-axis with reference to the center of coil.
Mx-U Moment for X-Axis at the top of the spring
My-U Moment for Y-Axis at the top of the spring
GxL-GyL Graph showing the displacement from the bottom of the spring in XY-axis with reference to the center of coil.
GxyL-deg Graph showing the displacement in angle from the bottom of the spring in XY-axis with reference to the center of coil.
Mx-L Moment for X-Axis at the bottom of the spring
My-L Moment for Y-Axis at the bottom of the spring
Data Pickup

You can pick up any data to determine if it is within specifications.

Axis-X being the axial force, Axis-Y being center of gravity,

Determine the force using upper and lower moment (torque).

  Data

Languages

SST Series comes with Japanese, English, Korean & Chinese (Simple/Traditional)

4 national languages, which can be changed anytime by user thus conforming standardization and consistency in measurement that supports worldwide testing

Display

Measurement result is a 3D view  help you to recognize the magnitude and direction

of the side force with refernce from the center for the moment (torque) of top and bottom of the spring.

Graph

Specification

 

National Standard  JIS B 7738 Spring Testing Machine Grade 1 
Model  SST-20KN
Stroke 800mm 
Length Resolution  0.01mm
Length Accuracy
Within±(0.05+0.0001L)mm (L is an arbitrary length mm)
Test Speed  10~2000 mm/min
Precision head Control  Precision ball screw and servo motor control
Speed control key (H,M,L control)
High speed: 1000mm/min; 1mm/inching

Medium speed: 100mm/min; 0.1mm/inching

Low speed: 10mm/min; no inching

Accuracy of load  within 1% of indicated value 
Unit selection  N, kN (Japan only) (kgf, lbf for overseas market)
Protective stop function

Stop by the upper and lower limit

Stop by the upper and lower soft limit function

Stop Key and emergency stop button to prevent overloading

Fluorescent display Standard accessories monitor
Power Voltage Single phase AC220V
Max Power Consumption 1.5KV 
Dimension W920 x D670 x H2000 
Weight Approx 650kg

Reviews

There are no reviews yet.

Leave Comment
Be the first to review “Spring Tester”

Your email address will not be published. Required fields are marked *

clear formSubmit