No.181-L FILM IMPACT TESTER (WITH REFRIGERATING MACHINE)

ASTM-D3420 ■No.181 FILM IMPACT TESTERThis tester is used to evaluate the impact hole punching endurance of plastic film, paper etc. A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale. The tester can…

Details

No.181 FILM IMPACT TESTER

ASTM-D3420 ■No.181 FILM IMPACT TESTERThis tester is used to evaluate the impact hole punching endurance of plastic film, paper etc. A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale. The tester can…

Details

No.124-PTL CABLE IMPACT TESTER

JIS-C3660-1-4, C8282-1, IEC-60811-1-4, 60884-1, JIS-C6821, C6851, C6861 This tester is used to conduct impact tests on insulated or sheathed wires in a low temperature chamber. It is also used to conduct the test on electrical parts such as a plug or socket. The sample is to be impacted by the tester in the low temperature…

Details

No.124 CABTYRE CABLE IMPACT TESTER

JIS-C3005 This tester is used to conduct impact tests on rubber and plastic electric insulated wires. The operator is to check the number of disconnections to each of the wires, cracks, and breakage of insulating materials and sheath when the test specimen is impacted by a prescript load which is dropped from a prescript height.…

Details

No.663 FURNITURE REPETATIVE FORCE ENDURANCE TESTER

JIS-S1203 This tester is for evaluating the strength and durability of furniture such as chairs or stools.The chair/ stool is fixed and applied a certain amount of weight onto the sitting surface, and the deflection amount and appearance at the sitting surface is recorded. This tester can also be used to check the strength of…

Details

No.371-S CARDBOARD CONTAINER COMPRESSION TESTER

JIS-Z0212, TAPPI-T804 This tester is used to conduct compression test to packaged cargo and container. The tester is especially suitable to evaluate compression strength of packaged cargo when it is lower loaded during its logistic process. Specification [Maximum Load]Max. 30 kN[Compression Plate]1,000 × 1,000 mm[Plate Opening]Max. 1,100 mm[Compression Speed]10 ± 3 mm/min[Accessory]Chart Recorder[Power Source]AC 200…

Details

No.316 RING CRUSH TESTER

JIS-P8126, ISO-12192(Option: Z0402, Z0403-1, Z0403-2) This tester is used to evaluate the compressive strength of ring shaped paper board according to the ring crush method. By changing the jig (option), the tester enables to conduct adhesive power test of cardboard, flat surface compression test, and vertical compression test. Specification [Specimen]W12.7 ± 0.1 mm, L152.4 to…

Details

No.272-PTL CABLE FLEXING TESTER

JIS-C3660-1-4, IEC-60811-1-4 This tester is used to conduct low temp. flexing tests on electric/ optic cable insulators and sheaths.The operator is to wrap the sample onto the mandrel and check if there are any cracks generated on the sample after conditioning. Specification [Specimen Diameter]Under φ12.5 mm[Mandrel Diameter]Specimen φ × 4 to 5[Wrapping Speed]1 wrap/ 5…

Details

No.272 CABLE LOW TEMP. FLEXING TESTER

JIS-C3660-1-4, IEC-60811-1-4 This tester is used to conduct flexing tests on insulated or sheathed wires in a low temperature chamber.The operator is to wrap the sample onto the mandrel and check if there are any cracks generated on the sample after conditioning. Specification [Specimen Diameter]Under φ12.5 mm[Mandrel Diameter]Specimen φ × 4 to 5[Wrapping Speed]1 wrap/…

Details

No.260 FOAM RUBBER REPETITIVE COMPRESSION TESTER

JIS-(K6382), K6400-4 This tester is used to repeatedly test compression residual strain of polyurethane foam and latex foam soft material according to the constant displacement method. Placing the test specimen between the two parallel plates and continuously repeating the compression to the test specimen 80,000 times at a compressing power so that the test specimen’s…

Details

No.216 UNIVERSAL MATERIAL TESTER

  This universal tensile elongation/ compression tester (Auto Strain/ Strograph) is best suited for plastic and rubber. The tester capacity comes in either a maximum of 5 kN or 10 kN respectively. The test specimen is attached to chucks on both ends and is applied elongation/ compression force continuously through loadcell until breakage. Tester control…

Details

Yasuda

Search by Material Plastic Plastic is often a preferred material over metal because it is durable and easy to work with. These plastic products need to be examined in their strength for impact, abrasion, heat-resistance and so on. Rubber Because of its elasticity and flexibility, rubber, including car parts such as tires, tubes, and brake…

Details