Ultrasonic Liquid Flowmeter µLF-300S

[Features]

●Capable of accurately measuring micro flow
● Rapid measurement response (300 sampling time per second)
● Non-contact sensing, integrated straight PFA tube
●Wider measurement range

Specification

System diagram

Ultrasonic Liquid Flowmeter µLF-300

[Features]

●Capable of accurately measuring micro flow
● Rapid measurement response (300 sampling time per second)
● Non-contact sensing, integrated straight PFA tube
●Wider measurement range

Specification

System diagram

Ultrasonic Gas Flowmeter SGF-200 (Small type)

[Features]

●Wider measurement range
●Automatic temperature correction
●Attachable to vertical piping
●Integrated flow rate and instant flow rate
selectable output
●Remote viewer(option)
(Maximum cable length 30m)

[Lineup (norminal diameter)]

40mm, 50mm, 65mm, 80mm, 100mm, 125mm, 150mm

Specification

System diagram

Ultrasonic Gas Flowmeter FEx-100 (Flame-proof type)

[Features]

- Flame-proof Exdll BT6-compliant
- Wide-Screen LCD and various display function
- Various output port (analog x2, digital x1, contact x4)
- Automatic pressure and temperature correction
- Flexible parameter configuration
-  Bulit-in power unit for pressure sensor and temperature
- Wider measurement range
- Precisely measure a small amount of biogas and digestion gas

Specification

Ultrasonic Gas Flowmeter GF-2500 (Steam type)

[Features]

- Semi-clamp-on type, non-intrusive flowmeter

- Gas seal unit enables sensor detachment without flow intervent

- No moving parts, low maintenance cost

- No pressure loss

Specification

Ultrasonic Gas Flowmeter GF-2500

[Features]

- Wide screen LCD and various display function

- High noise tolerance design

- No pressure loss

- Various output ports (analog x2, digital x1, contact x1)

- Automatic pressure and temperature correction

- Easy replacement with the compatibility of existing sensor

- Wider measurement range

Specification

No.162 SLIP TESTER

JIS-P8147 This tester is used to measure the friction coefficient of plastic film and paper according to the inclination method. By inclining the inclination board at a constant speed, the static friction coefficient can be measured at the tangent at which the test specimen starts to slip. Specification [Sled]W60 mm, L100 mm, Mass 1,000 g[Slip…

Details

No.156 MARON MECHANICAL STABILITY TESTER

JIS-(K6387), (K6392), (K6828) ■No.156 MARON MECHANICAL STABILITY TESTERThis tester is used to evaluate the mechanical stability of synthetic latex and synthetic resin emulsion. By rotating the rotary disk at a constant speed with constant pressure to the polyethylene liner set at the bottom of the specimen container, the tester will measure the coagulum content formed…

Details

No.152 AKRON RUBBER ABRASION TESTER

JIS-K6264-2, ISO-4649 This tester is to evaluate the abrasion resistance of vulcanized rubber and thermoplastic rubber. By pressing the rotating circular test specimen at a certain test load to the circumference surface of the abrading wheel, the operator is to acquire the abrading mass of the test specimen. The test specimen will usually be tires…

Details

No.151 DIN ABRASION TESTER

JIS-K6264-2, ISO-4649, DIN-53 516 ■No.151 DIN ABRASION TESTERThis tester is to evaluate the abrasion resistance of vulcanized rubber and thermoplastic rubber. By pressing the test specimen at a certain test load against the rotating drum that has an abrasive cloth on the abrading surface, the operator is to acquire the abrading mass of the test…

Details

No.150 LAMBOURN ABRASION TESTER

JIS-K6264-2, ISO-4649 This tester is used to evaluate the abrading resistance of vulcanized rubber and thermoplastic rubber. The operator is to abrade the test sample with the abrading wheel, which rotates independently at a different speed. Using the rotating speed difference of the test sample and the abrading wheel and the test load applied at…

Details

No.127 CABTYRE CABLE ABRASION TESTER

JIS-C3005 This tester is used to conduct an abrading test on rubber and plastic electric insulated wires. One end of the test specimen is to be attached to the 300 mm above the abrading circle and the other end attached with prescript load. The operator is to see if the insulated material inside the coated…

Details