No.162 SLIP TESTER

JIS-P8147 This tester is used to measure the friction coefficient of plastic film and paper according to the inclination method. By inclining the inclination board at a constant speed, the static friction coefficient can be measured at the tangent at which the test specimen starts to slip. Specification [Sled]W60 mm, L100 mm, Mass 1,000 g[Slip…

Details

No.156 MARON MECHANICAL STABILITY TESTER

JIS-(K6387), (K6392), (K6828) ■No.156 MARON MECHANICAL STABILITY TESTERThis tester is used to evaluate the mechanical stability of synthetic latex and synthetic resin emulsion. By rotating the rotary disk at a constant speed with constant pressure to the polyethylene liner set at the bottom of the specimen container, the tester will measure the coagulum content formed…

Details

No.152 AKRON RUBBER ABRASION TESTER

JIS-K6264-2, ISO-4649 This tester is to evaluate the abrasion resistance of vulcanized rubber and thermoplastic rubber. By pressing the rotating circular test specimen at a certain test load to the circumference surface of the abrading wheel, the operator is to acquire the abrading mass of the test specimen. The test specimen will usually be tires…

Details

No.151 DIN ABRASION TESTER

JIS-K6264-2, ISO-4649, DIN-53 516 ■No.151 DIN ABRASION TESTERThis tester is to evaluate the abrasion resistance of vulcanized rubber and thermoplastic rubber. By pressing the test specimen at a certain test load against the rotating drum that has an abrasive cloth on the abrading surface, the operator is to acquire the abrading mass of the test…

Details

No.150 LAMBOURN ABRASION TESTER

JIS-K6264-2, ISO-4649 This tester is used to evaluate the abrading resistance of vulcanized rubber and thermoplastic rubber. The operator is to abrade the test sample with the abrading wheel, which rotates independently at a different speed. Using the rotating speed difference of the test sample and the abrading wheel and the test load applied at…

Details

No.127 CABTYRE CABLE ABRASION TESTER

JIS-C3005 This tester is used to conduct an abrading test on rubber and plastic electric insulated wires. One end of the test specimen is to be attached to the 300 mm above the abrading circle and the other end attached with prescript load. The operator is to see if the insulated material inside the coated…

Details

No.101-H TABER TYPE ABRASION TESTER

JIS-A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM-D1044, TAPPI-T476, JAS, (JASO-M403), ISO-4649, 5470-1, 7784-1/2, 9352 ■No.101-H TABER TYPE ABRASION TESTERThis tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel. The operator is to place the abrading wheel to the rotating…

Details

No.368 INTERNAL BOND TESTER

TAPPI-T569, UM403 This tester is used to evaluate the internal bonding strength of paper and paper board. The operator is to measure the workload it took for the hammer to peel the L-shaped clasp which is attached to test specimen on the test specimen adhesion board. Specification [Capacity]0 to 0.4 J (Scale 0.005 J)0 to…

Details

No.305-YPL MULLEN LOW-PRESSURE TYPE BURSTING STRENGTH TESTER

JIS-K6404-11, P8112, P8131, TAPPI-T403, T807, T810, ISO-2758, 2759 This tester is used to evaluate the bursting strength of paper, paper board, liner film, cardboard, rubber, and plastic film. The operator is to tighten the test specimen to the tightening board and pressurize it with a rubber membrane mediator. The maximum pressure when the test specimen…

Details

No.304-YPH MULLEN HIGH-PRESSURE TYPE BURSTING STRENGTH TESTER

JIS-K6404-11, P8112, P8131, TAPPI-T403, T807, T810, ISO-2758, 2759 This tester is used to evaluate the bursting strength of paper, paper board, liner film, cardboard, rubber, and plastic film. The operator is to tighten the test specimen to the tightening board and pressurize it with a rubber membrane mediator. The maximum pressure when the test specimen…

Details

No.274 PUMMEL TESTER

This tester is for evaluating the bondage of PVB film fragments inside safety glass composites used for automobiles.The glass is constantly impacted by hammer while moving in an S shape. The specimen is then evaluated according to the Pummel value by the level of exposed PVB surface. Specification [Test Specimen]305 × 160 × 2.5 to…

Details

No.268 UNIVERSAL IMPACT TESTER

JIS-K7111、ASTM-D256、D6110、ISO-179、180 This pendulum type Charpy impact tester can automatically conduct the test cycle, and is capable of testing at extremely low temperatures (as low as -70°C). Test conditions are inputted via touch screen and a maximum of 210 specimens can be tested continuously. Due to the high capability of the refrigerating system, it is both…

Details